ADTO News

• 

  Secure Technical Measurement To Set Up Frame Scaffolds

  1. When the scaffold is moving, it must be at a certain distance from the neighboring side and assign special person to look after; 2. In mobile, it is forbidden to start accelerating suddenly.

  2017-09-30
• 

  The erection process of Frame scaffolding

  (1) the installation sequence of the scaffold: setting the base, the first step frame on the base, the shear strength, the laying of the pedal (or the parallel frame), insert the core, install the door frame, and install the locking arm.

  2017-09-29
• 

  Frame Scaffolding Platform Performance and construction measures

  1) it is necessary to install the keel, the decorative material, the pipe, equipment, and bracket, etc., so as to facilitate the construction, so the construction is carried out with a full hall or mobile operating platform. The operating platform does not need professional personnel to disassemble

  2017-09-27
• 

  The Solution Choice For Frame Scaffolding

  According to the requirements of the decoration drawings and the construction site requirements, the following points should be considered in the construction of the Frame scaffolding: 1) the operation is flexible and can be built according to the requirement of the site.

  2017-09-26
• 

  Ringlock Scaffolding is Stable and Reliable

  ringlock scaffolding accessories, with strong corrosion resistance, strong frost crack resistance, acid and alkali resistance and high temperature resistance, are very malleable. Its quality is safe and reliable, also environmental friendly. It belongs to the recyclable products.

  2017-09-21
• 

  The Cost Analysis of Ringlock Scaffolding

  The new type of disc - type scaffold is also known as the Ringlock scaffold, which is displayed in the construction site use case in the high - length - span scaffold project in Beijing. Set-up height 30 meters, the largest engineering compared with the traditional cuplock scaffold

  2017-09-20
• 

  The Most Reliable Maintenance Work For Ringlock Scaffolding

  Today we are going to introduce the maintenance work after the use of the Ringlock scaffolding. 1. Any bending deformation should be adjusted first, the damaged components should be repaired first and then stored in storage, otherwise it should be changed.

  2017-09-19
• 

  The Advantages Of Ringlock Scaffolding

  The disk support frame was a product of Germany in the 1980s, which was improved and was a mature method. It is currently the most widely used and trusted support system. 1. Fast, because it is a pin card in fixed, in each connection, only insert the pin insert, the bar is easy to understand, and it can be used.

  2017-09-18
• 

  The Precautions When installing Ringlock Scaffolding

  ADTO Ringlock scaffolding, as a kind of common scaffolding system, as a result of the disc type scaffold material are all made of low alloy structural steel, the main components are made inside and outside galvanized anti-corrosion process, and the connection mode for the international mainstream scaffolding connection mode, each node can have 8, the direction of the connection, respectively, can be used for horizontal pole, diagonal, positioning the connection rod.

  2017-09-17
• 

  Safety Use and Safety Building of the Scaffolding Tube in the Project

  1, scaffold erection or dismantling personnel must be conducted by professional scaffolder. 2, operation must wear safety helmet, safety belt, wearing non-slip shoes. 3, the fog and rain and snow weather and 6 magnitude winds, may not be the heights of the scaffolding tube operations. 4, scaffolding tube, homework, line by line according to the requirement of the formation of basic structure unit, step, and gradually build, rectangle around the scaffold should be from one of the

  2017-09-14
• 

  The Safety Protection of the Erection and Dismantling Work of Scaffolding Tube

  (1) operation site shall have security and warning signs, irrelevant personnel are not permitted to enter the danger zone. (2) for a lost or has not been formed stable scaffolding tube parts adding temporary support or Rachel. (3) in the seat belt buckle hold on it, should be a safety net. (4) set the material on or under the hanging of facilities, forbid throwing. 15, operation safety protection:

  2017-09-14
• 

  The Detailed Analysis of the Scaffolding Market in China

  For a long time, because the erection tool itself and its construction technology and the use of safety management in a relatively backward state, causing a high incidence of accident. To expand with the development of economy, the construction requirements, and follow the demand of construction safety equipment also ascend, scaffold has been in the advertising industry, municipal, transportation, mining and other departments is also widely used. Champ

  2017-09-13
• 

  The Great Fluctuation of the Scaffolding Tube Market in China

  Now support scaffolding tube price factors mainly lies in the insufficient supply of tension and profit space: first of all, the scaffolding tube low class product inventory, because of the strip out of stock, so part of the scaffolding tube specifications supply nervous, especially tensions in seamless tube resources is more outstanding, because part of the seamless tube factory in

  2017-09-13
• 

  How About the Corrosive Resistant Ratio of the Scaffolding Tube

  By putting the same strip directly in the atmosphere, where a tent to determine the effect of rain. The effect of artificial irrigation is by artificial sponge with soap water scrubbing every six months the right of each panel. Results found, and where a tent and don't wash, compared to the slats of scrubbing through the rains washed out and artificial remove surface dirt and debris has good effect to surface conditions. But also found that the surface processing conditions may also be

  2017-09-12
• 

  The Supply and Maintenance of the Scaffolding Tubes in the Market

  In fact, stainless steel welded pipe is produced in all standard metal shapes and sizes, and there are many special shapes. The most commonly used product is made of sheet and strip, also used in the heavy plate production of special products, for example, production of hot-rolled steel and extrusion structure steel structure. And circular, elliptical, square, rectangular and hexagonal welded pipe or seamless steel tube and other forms of products, including profiles, bars, wires, and casting.

  2017-09-12