Cantilever Scaffolding

Climbing Scaffolding

Scope of Application

Applicable to high-rise and super-high-rise buildings.

Suitable for high-rise and super high-rise buildings, which have less upright structure and protruding components.

Safety

Mature technology and the workers have a relatively accurate grasp of the operation time and process.

But having shortages of the continuous and repeated high-altitude set-up and dismantling work, and the high risk of falling people and objects.

Low altitude assembling,  high altitude use. No need to repeatedly dismantle and set up after assembly.Fewer people needed in the process of lifting. Avoiding aerial works at high altitude. Using professional equipment. With good safety performance.

Shortage: Easy to lose balance in the lifting process of the frame. Longtime assembly of the frame body, so the entry time should be reasonably arranged. After the lifting of the frame body, the bare floor may have the falling of edged objects and the falling off the base of the frame body, which puts higher requirements on the site civilized construction and cleans up of the construction site.

Progress

Tower crane is required when the scaffolding is assembly and dismantle. The cantilever of section steel has a great influence on the construction progress, and the whole has a certain influence on the construction progress. Decorate project needs to set up additional basket construction.

Fast lifting speed, the climbing process has no effect on the construction. And not occupied the construction tower crane, which is conducive to speed up the construction progress. During the construction of the structure, it is easy to arrange the construction procedure.

Civilized Construction

Occupying a certain area of the construction site. Having a large amount of material consumption and dump volume, with a lot of waste left which is difficult to clean up on the frame plate. Regular replacing of the safety net is needed.

No construction site occupied a small maintenance area, good appearance.

Structural Effects

Cantilever steel sections need to be embedded with fixed CARDS on the floor, and there are many holes reserved, which has a certain adverse effect on the structure.

Having a demand for the strength of the frame and its associated shear walls for load transfer.

Inspection and Maintenance

Large inspection and maintenance work.  Overall inspection is difficult.

The small amount of inspection and maintenance work.