ADTO News

• 

  Differences Between Hot Dip Galvanizing And Cold Galvanizing

  The main differences between hot dip galvanizing and cold galvanizing are as follows: 1. Unlike corrosion resistance, hot galvanizing is dozens of times that of cold galvanizing. 2. The method of operation is different: hot galvanizing is the zinc plating in the molten zinc of 450-480 degree, and the cold plating is zinc plated by electroplating or other methods at normal temperature. 3. The thickness of galvanized layer is different, and the thickness of hot galvanizing is much greater than that of cold galvanizing.

  2017-12-15
• 

  The Characteristics Of Galvanized Scaffolding Tubes

  The best advantage of galvanized pipe is that the current efficiency is as high as 100% and the deposition rate is fast, which is unmatched by other galvanized process. Due to the lack of detail in the coating, the dispersion ability and the deep plating ability are poor, so it is only suitable for electroplating such as tube materials and wire materials.

  2017-12-12
• 

  The Maintanance Of Scaffolding Tubes

  1. Investigate the vertical error of all or part of the scaffold, and investigate the side ports of the scaffold, whether it is inclined or not. If any abnormality is found, the personnel should be arranged for reinforcement immediately. 2. Check the bamboos on the mattress frequently, and timely fix broken bars and fill holes.

  2017-12-10
• 

  The Set-up Requirements Of Frame Scaffolding

  1. The inner and outer sides of the door frame should be cross-supported, and its dimensions should be matched with the spacing of the door frame and locked with the door frame. (1) the setting of the wall parts: if the frame is 45m below the height, it will be less than or equal to 6m. The frame is 45~ 60m, which is less than or equal to 4m (one at each level). The level is less than or equal to 6m and should comply with the specification.

  2017-12-07
• 

  Security Technical Measures For Dismantling Of Frame Scaffold

  (1) the scaffold should be ready before dismantling buildings on the surface of the product protection, debris and rubbish on the scaffold should be cleaned up, and has been careful scaffolding demolition scheme, safety technical disclosure to the relevant staff. Be alert and relevant.

  2017-12-05
• 

  Secure Technical Measures To Set Up Frame Scaffold

  1. When the scaffold is moving, it must be at a certain distance from the neighboring side and assign special person to look after; 2. In mobile, it is forbidden to start accelerating suddenly. 3. Check the scaffolding regularly, find the problems and hidden dangers, and repair and reinforce the construction timely before the construction work, so as to achieve solid and stable construction and ensure the safety of construction.

  2017-12-04
• 

  Main Factors Affecting The Tubular Scaffolding Capacity

  According to the relevant test materials, double row fastener type steel pipe scaffold overall stability test and the result of calculation and analysis, the excluded from the change of the load factor, the main factors influencing the scaffolding buckling bearing capacity as follows:

  2017-11-30
• 

  Safety Management For Tubular Scaffolding

  1. The scaffold personnel must be the professional scaffolds that are qualified according to the current national standard "safety technical assessment of special operations personnel" (GB5036). The staff should be examined regularly, and the qualified person will be able to hold the certificate.

  2017-11-28
• 

  Tips You Should Know When Removing Tubular Scaffolding

  1. Preparations for the removal of the scaffold shall meet the following requirements: (1) it is necessary to check whether the scaffold connection, the wall piece and the supporting system meet the structural requirements. (2) the removal sequence and measures in the design of the construction organization shall be supplemented and improved according to the inspection results, which can be implemented after approval by the competent department;

  2017-11-27
• 

  Safe Standard For Cuplock Scaffolding System

  Speaking of scaffolding, everyone should be familiar with it, especially in the construction industry. It is a kind of auxiliary equipment for building construction. There are many kinds of scaffolding, and the cuplock scaffold is one of the more advanced scaffolds on the market. Its joint construction is reasonable, the production process is very simple, and the operation is easy, the use scope is more extensive, can satisfy the construction requirement of a variety of buildings.

  2017-11-23
• 

  Doule Row Outside Scaffolding

  Using a Cuplock scaffold, it is convenient to set up two exclusive scaffolds, which can be quickly saved and quickly saved. It is especially suitable for setting up curved scaffolds and high-rise scaffolds. At present, the maximum height of the floor scaffold with "one rod to the top" (i.e. Scaffold full height using single pole) has reached 90.3 m.

  2017-11-21
• 

  Difference Between Ringlock Scaffolding And Coupler In The Past

  difference between building scaffold fittings coupler products with the past, to sum up now. Scaffolding coupler products compared with the past, the disc type building scaffold fittings has very good strength and can completely guarantee steel pipe between the adjacent security, in the construction in the use

  2017-11-16
• 

  How Many Years Of Service Life For Ringlock Scaffolding

  In today's construction industry, there is often the construction site of the existence of the socket type ringlock scaffolding. This type of new type of socket type of button-type scaffold is manufactured by hongxin scaffold company in renqiu city, which is convenient for application in industry and improves construction efficiency.

  2017-11-14
• 

  Tips You Should Know When Purchasing Ringlock Scaffolding

  1. Pay attention to the material of the scaffold wheel. The material of general scaffolding wheel is PU, TPR and so on. 2. Bracket selection: it is divided into directional and universal, and the material is usually made of carbon steel, which can be used for various electroplating, such as galvanizing, copper plating

  2017-11-12
• 

  Safety Technical Measures For Tubular Scaffolds

  1. Standard of tubular scaffolding: horizontal vertical, strong connection, real foot, layer of holding, upright, smooth and smooth, safe facilities and strong. 2. Scaffolds shall not be mixed with bamboo, and the main stress bars, such as vertical poles, large horizontal rods, small horizontal rods and scissors support, must be used in the same building facade.

  2017-11-09