ADTO News

• 

  Why Does the Projects Use Scaffolding Planks for Many Times

  ADTO construction steel scaffolding planks high strength of Q235 steel pipe for galvanized steel scaffolding planks of raw materials, with automatic gas shielded welding and become, use advanced overall galvanized process, improve the surface corrosion rust resistance, thus greatly extend the service life. With the development of the domestic construction industry, building the scaffolding planks are important components of modern construction equipment, widely used in the construction of each partner, and plays a key role in it.

  2018-03-19
• 

  Choose A Scaffolding Expert of ADTO to Be Your Provider

  Scaffolding planks can generally called steel scaffolding, steel construction steel scaffolding planks, pedal steel, galvanized steel scaffolding planks, hot dip galvanized steel pedals, deeply the general shipbuilding, oil platforms, power, and was unanimously praised the construction and promotion of use. Steel board with fire prevention, prevent many sands, light weight, corrosion resistance,

  2018-03-16
• 

  The Rules for the Erection of Frame Scaffolding in the Construction Project

  1, door frame scaffolding, (1) the door frame scaffolding interval span, in line with the current industry standard "door type steel pipe scaffold" (JGJ 128-2000), and cooperate with cross support the specification. (2) the door poling high metope net distance should not be greater than 150 mm, greater than 150 mm, should be taken to select frame scaffolding board or other high protective security measures.

  2018-03-01
• 

  Where Can You Buy a Qualified Ringlock Scaffolding System in the Market

  Ringlock type scaffold mainly is widely used in bridge engineering of general viaduct, tunnel project, factory building, elevated water tower, power plants, refineries. Support design and special workshop, also apply to the overpasses, span the scaffolding, storage shelves, chimney, water tower and indoor and outdoor decoration, large-scale concert stage, background, the stands, balcony, modelling, stair system, the party stage set-up, sports stadium

  2018-02-25
• 

  Safety Requirements of Mobile Frame Scaffolding in the Construction Project

  (1) the erection of high-level scaffolding, adopted by the various materials must meet the quality requirements. (2) the top scaffolding foundation must be strong, before the erection of the computation, meet the requirement of load, and set-up, and according to the construction of drainage measures. (3) the scaffolding, technical requirements should comply with the regulations of relevant specification. Vertical closed (6) : from ADTO: mobile frame scaffolding safety requirements in the second step

  2018-02-06
• 

  What Are the Features and Future of Ringlock Scaffolding in the Project

  Since the 90 s, many domestic companies to introduce advanced foreign technology, developed a variety of new scaffold, such as ringlock scaffolding, scaffold ringlock, simulating the scaffold, as well as various types of climbing scaffold. In 2013, is a professional scaffolding manufacturer hundreds. Technically, our scaffolding companies already have the capacity to produce all kinds of new type of scaffolding. But the domestic market has not yet formed, the new scaffold construction enterprises still lack of knowledge.

  2018-02-04
• 

  Introduction of Ringlock Type Scaffolding General and Special Requirements

  Engineering foundation for backfill soil, to the required density backfill soil should be strengthened, still need to use on the ground along the direction perpendicular to the wall of casting 10 cm thick concrete; Surrounding the scaffolding still need to due and drain. Sweeping bar cannot be directly placed on the ground, but the pad with thickness of not less than 50 mm stow-wood or plate.

  2018-01-30
• 

  Introduction to the Development of Ringlock Type Scaffold Forms

  With the requirement of the construction safety standardization and civilization construction, socket type button scaffold in application is inevitable trend of the key projects, as the ancestor of scaffolding industry in the steel pipe scaffold is known, most people believe to see this article also in the use of steel pipe scaffold, small make up also believe that the construction market in a long time can't completely eliminate steel pipe scaffold. Raw material contrast, socket type button scaffold according to the requirements of the existing

  2018-01-30
• 

  Ringlock Scaffold Support System Is the Safest and Most Convenient

  Why ringlock scaffold support system will be the scaffold areas internal search keywords?Because buckle scaffold material as stud for Q345 steel pipe materials, so the bearing capacity of the system is bigger than the traditional scaffold bearing capacity, so we can expand the scaffold in the design of stud spacing, directly reduce the content of steel, reduce the material cost of construction company.

  2018-01-29
• 

  What Is the Difference Between the Scaffolding Fittings and Couplers

  Ringlock type building scaffold fittings is very popular now, so there is a key point should be consider, building scaffold fittings so hot, that what is the difference between building scaffold fittings fasteners products with the past, to sum up now. Fastener products compared with the past, the ringlock type building scaffold fittings has very good strength and is c, can completely guaranteeing steel pipe between the adjacent security, in the scaffold construction in the use of such a scaffold construction spare parts,

  2018-01-24
• 

  Why is the Scaffolding Becoming the Key Product Tools on the Construction Site

  Because ringlock scaffold material as stud for Q345 steel pipe materials, so the bearing capacity of the system is bigger than the traditional scaffold bearing capacity, so we can expand the scaffold in the design of vertical pole spacing, directly reduce the content of steel, reduce the material cost of construction company. Then there is high level in appearance, all new ringlock scaffold system parts packaged hot dipping zinc as his, so he after completion of the erection is quite attractive, directly promoted

  2018-01-23
• 

  The Standard for Choosing the Scaffolding Can Be Different

  Ringlock scaffold Could be selected according to the requirements of bearing capacity is not the same as standard frame body to ensure safety; Ringlock to scaffolding processing, the basis of practice and embedment depth must be accurate and reliable. Shelf arrangement, stud, size bar spacing should comply with the requirements. Shelves of the erection and assembly, including the selection of tool holder and key should

  2018-01-23
• 

  How to Use the Scaffolding Without Any Risks of Accidents

  1) homework every 1 m2 frame on the actual construction load weight (personnel, materials, and machines) shall not exceed the specified value or under construction design value. Construction load (homework layer on the weight of the personnel, equipment, materials) standard, structure of the scaffold to take 3 kn/m2;Tool scaffolding 3 kn/m2. 2) set of materials on the surface of the frame should be packed in solid, shall not affect the

  2018-01-22
• 

  How to Distinguish between Single Row Scaffolding or Composite Scaffold

  A, building the upper wall outside pick out more than 1.5 m, according to the exterior of the upper edge is concave and convex length times building scaffolding, the total height calculation area; Bottom wall retreat into parts in accordance with the vertical projection area of the palisade structure according to the height of the corresponding single scaffold is calculated. Second, when the building's exterior line building scaffolding set-up height of less than 15 m, press computation

  2018-01-21
• 

  The Check&Acceptance After Setting Up Scaffolding

  The frame structure conforms to the requirements of the construction plan, and the size change of individual parts should be within the allowable adjustment range; The node security connection is reliable. The scaffold clamp tighten degree should be controlled in torsion moment 40 n. n. m ~ 60 m, where all welding welding quality should be reliable, embedded parts of embedding should comply with the design requirements, have sufficient strength, joint connection of wire rope should be reliable;

  2018-01-16