ADTO News

• 

  What Are the Safe Ways to Use Scaffolding System and Tubes

  A, protective measures. In high-rise building construction, every step outside the frame to be paved with bamboo basketry or steel fabric, in addition to deaden 1 m high railing and standing bamboo basketry board. On the outer edge of the scaffold, set up safety set net. Second, the floor protection measures. Now most of the high-rise buildings are concrete frame constructions, widespread adoption steel pipe support steel formwork construction. In order to

  2016-08-07
• 

  What Is the Process to Erect Frame Scaffolding System For the Construction

  Scaffolding compared with the general structure, the working conditions has the following features: 1, by load variation; 2, fasteners, belong to semi-rigid connection nodes and node rigid size is associated with fastener quality, installation quality, node performance there is a big variation; 3, scaffolding structure and component of initial defects, such as initial bending of bar, rust, erection of dimension error, the eccentric load, etc.;

  2016-08-04
• 

  Safety Measures Before Erecting the Frame Scaffolding System

  1. Standard: the scaffold erection horizontal flat vertical, connection is firm, foot really, layer upon layer cell, prop up straight, safety facilities, strong. 2. The bamboo scaffolding shall not steel mix build, the main stress bar, such as the vertical rod, bar, small beams and bracing and so on in the same building facade material must use the same material. 3. Scaffold erection work must have a national standard of the People's Republic of China "special

  2016-08-04
• 

  Usage and Maintenance of Frame Scaffolding Components and Accessories

  In order to guarantee the quality of construction projects and the safety of the workers, we must prepare scaffolding parts research and maintenance, protect the use of scaffolding, small make up with all of you in the above article explained the scaffolding parts maintenance, today to share with you the use and preservation of scaffolding parts. Parts use and preservation must set up a sound led hair, recycling, reflection, maintenance system, maintenance and management of the

  2016-08-03
• 

  Safe Technology Measures of Working on the Scaffolding System

  1 outside scaffolding each take a layer structure, pitched to end, the project department safety personnel qualified rear can use. No supervisors and individual shall not be arbitrarily dismantled scaffold parts without permission. 2. Strictly control the construction load scaffolding shall not focus stacking load, construction load shall not be greater than 3 kn / ㎡, ensuring the safety of large reserves.

  2016-08-03
• 

  Connection Between the Frame Scaffolding Body and Engineering structure

  1. The frame scaffolding structures are generally high, the rack body width in 1.2 meters or so, only form slenderness ratio imbalance. Moreover, structures, it is difficult to ensure vertical bar in vertical. Eccentric torque, big, increased the proportion of frame scaffolding instability, so erect node to lap together form a whole body and engineering structure, look from actual situation caused deformation, capsized nodes sparsely populated and is one of the main reasons for the artificial

  2016-08-02
• 

  Building Standard of Vertical Tubes in the Frame Scaffolding Systems

  1. According to the height of frame scaffolding construction, using the load conditions, a general idea of the building site, to deal with frame scaffolding stem base, foundation treatment is good or bad directly influenced the stability of the frame body. Due to the unreasonable construction schedule of requirement and engineering technology and so on a variety of reasons, after the engineering foundation or underground engineering also slot

  2016-08-02
• 

  What Are the Features of Full Frame Scaffolding System

  In recent years, as the rapid development of infrastructure construction in domestic railway and highway transportation in accordance with the full frame scaffolding construction design of the bridge is also more and more, greatly promote the application of full frame scaffolding process, full frame scaffolding construction technology to improve continuously. Modern also full frame scaffolding construction technology development in the direction of large tonnage, long-span, regular full frame scaffolding steel bar itself bearing capacity is limited

  2016-08-01
• 

  Where to Buy the Frame Scaffolding Drawings and Designs

  ADTO frame scaffold is made combined with market demand, our company developed vigorously, and obtain the patent for utility model and so on a number of national patent certificate, annual production and sales capacity of over 15000 tons. ADTO frame scaffold mainly by the frame body, cross diagonal braces, steel springboard, adjustable base, etc. Use scaffolding lightweight concept, and can increase the universal wheel under the base, make the door scaffold can move flexibly and save tower down time, improve efficiency, reduce the cost.

  2016-08-01
• 

  What Is the Standard Frame Scaffolding Used for and Made of

  The standard door scaffolding is made by two pieces of the frame body, two diagonal member, four connecting rods, a hook of springboard. Gantry scaffolding usage basically as interior decoration or simple exterior wall construction, optional universal wheel, moving quickly used to decorate and support body. Frame scaffolding has the development experience for a long time. Frame Scaffolds - Access Ladder Frame Walk-Through OK for Climbing Must have External Access

  2016-07-31
• 

  Tell You About Frame Scaffolding Functions and Using Tips

  1, the use of components should be carried out in accordance with the relevant provisions laid 2, try to reduce the error in the process of the erection, the biggest error must not exceed 100 mm. 3, as far as possible to ensure even and scaffolding and building external wall surface vertical wall hang on. 4, early in the process of building construction personnel shall be prohibited from entering the danger zone, shall not interfere with the construction personnel.

  2016-07-31
• 

  What Features and Advantages of Ringlock Scaffolding Are

  With continuous development of society, the construction industry is advancing in the direction of the new. New technology, new material, new technology is developed and used to the construction industry, provides more fresh blood for the building industry. ADTO Group production of button scaffold series products because of its incomparable superiority are bound to replace the original traditional scaffolding promotion use. So ADTO Group button scaffold

  2016-07-28
• 

  What Are the Accessories in the Ringlock Scaffolding Used For

  China in the field of construction, mainly use frame ringlock scaffolding, because such scaffolding, simple and quick, the cost is low. And ADTO Group plate ringlock (scaffold) are template support system in combination with offer ringlock (scaffold) template production and sales experience, according to market demand and development of heavy-duty bearing structure, Ф worksite is 60 mm high strength galvanized pipe, has a high bearing capacity. ADTO Group set ringlock (scaffold)

  2016-07-28
• 

  Difference Between Floor Type Double Row Scaffold and Lifting Ringlock Scaffolding:

  1, a one-time investment materials greatly reduced, which can improve the utilization rate of turnover materials; 2, the operation is simple, fast, less labor input, low labor intensity; 3, do not take up the tower crane, use process to speed up the construction schedule; 4, reduce the engineering cost. Specific contrast is as follows. Material: floor type double row steel pipe scaffold for disk use steel tube, card consumption and

  2016-07-27
• 

  What Determine the Price of Scaffolding? Market Demands Can Do It

  1 The welded pipe diameter should be 48 ~ 51 mm, wall thickness 3 ~ 3.5 mm, length to 2.1 ~ 2.8 meters and 4 ~ 6.5 meters advisable, severe corrosion, bending, crack, damage may not be used. 2. The certificate should be zero fastener factory, brittle, deformation, sliding wire shall not be used. 3. Steel scaffold board should adopt the no. 3 of 2 ~ 3 mm thick steel plate, with length of 1.4 ~

  2016-07-27