1. Image stitching: large back size width generally in 5 to 10 meters, 3 to 5 m high;Print cloth 3.2 meters wide, so the picture must be joining together, must choose vertical shopping when stitching, such picture stretched up to be smooth.
2. The conference background board side walls: screen print at around to make blood respectively, the extension of the 20 cm, so from the side is the continuation of the main screen, the overall effect is better.

(1) to put a sweeping bar, scaffolding poling erect (frame), the first according to provisions of spacing and sweeping the floor at the bottom of the stem buckle knot, installing horizontal bar, the first step will also be after poling correction vertical buckle knot. Built for good in the first 1-2 on both sides of a corner root length and root stem 1 high shelf (generally no more than 6 m, wooden feet hand lever for more than 6 m, can take first to the third step), and set up according to the requirements of regulations or scaffolding diagonal bracing, to form a stable starting shelf extending to both sides.

3. Set up items shall be checked
1) check whether there is picture folds;
2) whether truss joint between horizontal flat vertical;
3) whether the wire stretched picture frame (if so, look from the front have a bulge phenomenon).
4) dust cleaning screen: stitching images and stretched, screen direct contact with the ground, there will be a lot of dust on top. Set up, use wet cloth clean.

5) especially in the winter, the outdoor and indoor temperature difference is too big to make prints brittle fracture or fold formation, then need to be careful to sort out and use hair dryer blowing equipment such as continuous damage on the image part, general traces of fold and can be quickly removed, seriously damaged if you need to make the picture again.