ADTO News

• 

  Technical Requirements on the Erection of Frame Scaffolding in the Construction

  1. The scaffold outside the corner should be included, on both sides of the step by step set level link rod, door frame connected to the corner. 2. High frame scaffolding the channel mouth should not be greater than 2 door frame, should not be greater than 1 door frame span wide; The channel mouth reinforcement measures should be taken. 3. Be door type steel pipe scaffold erection height should not be more than required.

  2017-07-24
• 

  The Foundation Treatment of Frame Scaffolding in the Project

  1. To ensure the bearing capacity of foundation with sufficient poling foundation construction should meet the requirements of standards and construction organization design when on the floor structure, pick the scaffold erection stud should be laid the foundation of the plate or block. 2. Based on scaffolding should play the door frame upright position line plate, base position accuracy.

  2017-07-24
• 

  Comparison Between the Safety of Frame Scaffold and Fastener Scaffold

  Frame type steel pipe scaffold fastener type steel tube scaffold 1 Basic building blocks (1) the frame, cross support, connecting rods, reinforcement Stem, base and scaffold board (2) all component standardization production (3) attachment standardization 1) phi 48 steel pipes, fasteners, iron wire, bamboo (wood) Frame plate (2) the common steel pipe, according to the need to cut (3) accessories top

  2017-07-23
• 

  The Steel Usage Comparison between Frame Scaffolding and Fastener Type

  Fastener type steel pipe scaffold according to JGJ130-2001 "technical specification for construction fastener type steel pipe scaffold safety and bowl JGJ166-2008 type steel pipe scaffold, its to 48 mm steel pipe diameter. Wall thickness of 3.5 mm; The calculation unit weight is 3.841 kg/m; Frame scaffolding according to JG13-1999 "door type steel pipe scaffold and JGJ128-2000" the

  2017-07-23
• 

  How to Check the Quality of Scaffolding Planks Used in the Project

  1. The appearance of hot dip galvanized steel scaffolding planks size length is not restricted, generally width is 240 mm, 250 mm, height 65 mm, 50 mm respectively. Steel scaffolding planks dimension allows error: should not be more than + 3 mm in length, width 2. Steel scaffolding planks frilled edge corners should be maintain 90 °, the deviation is unfavorable exceed °. 3. Steel scaffolding planks, board face should level off, the plate deflection should not be more

  2017-07-20
• 

  The Design and Property Features of Scaffolding Planks Accessories in the Project

  The use of scaffolding to also want to cooperate with related accessories can give play to the role of the best, and accessories also need to design reasonable, meet the safety requirements. Scaffolding accessories in the production of high quality material and new mode of production, improve product performance, and scaffolding, to ensure safety. Vertical lifting equipment such as derrick scaffolding accessories are also in the form of

  2017-07-20
• 

  The Scaffolding Planks Equipment and Its Products of Scaffolding Planks

  The weight of the specifications of the same scaffold scaffolding planks, wooden pedal is 1.5 2 times the weight of the steel scaffolding, rainy days after absorbing water more cumbersome wooden pedal, and extreme non-slip. Workers in construction of big, scaffolding planks shall be 2 men, shipment steel scaffolding planks wholesale, and my company produces the steel scaffolding planks for one person can take 2-4 pieces, greatly improve the working efficiency, high strength makes scaffolding tube can reduce the number of use.

  2017-07-19
• 

  Steel Scaffolding Planks Can be Safer and More Efficient in the Application

  Wood board is to use more, but the equipment is easy to crack, rust, easy to burn, can cause many problems on. As the demand of the society and the development of technology, hot dip galvanized steel scaffolding planks has rust prevention, wear resistance, and wire, fire and other characteristics, by spectrum coefficient is high. According to statistics, the fire that happened in the high-rise building construction accounts for more than 85% of the high-rise building fire, such as the Shanghai world financial center fire,

  2017-07-19
• 

  Steel Scaffolding Planks Equipment Erection of the Security Matters

  Steel scaffolding planks equipment manufacturer is found in the process of the erection of steel board, to keep fasteners, tools and materials to prevent fall injury. Throwing objects are strictly prohibited from the direction to designated persons care, prevent others go. Enter the construction site wear a good helmet, likewise, fasten the work high above the fasten safety belt, water homework wear life jacket. Construction at night, a big team must ensure that adequate illumination. Not allowed to move

  2017-07-18
• 

  New Kind of Galvanized Scaffolding Planks and Its Application Domestically

  Facing the problem of traditional scaffolding planks, in order to actively respond to a nation called on, scaffolding steel manufacturing co., LTD. Has been aiming at low carbon energy, production and sales of the fire prevention, high strength, resistance to sliding plate scaffolding planks. Galvanized steel compared with the traditional steel plate with light weight, high safety coefficient, good stability, good anticorrosion performance, convenient loading and unloading,

  2017-07-18
• 

  Specifications on How to Build the Scaffolding Planks in the Project

  A, the material 1. The set-up need the steel pipe scaffold use steel scaffolding planks, fasteners and parts must be unified specifications, complete documents, stop using the defective goods and nonconforming steel pipe. Materials management personnel should according to the plan and disclosure check material specification and quality, and acceptance formalities and organize qualitative data; 2. The use of steel tube in the quality should comply with the GB/T700 - grade A steel Q235

  2017-07-17
• 

  It Is A Trend to Use High Strength Steel Planks in the Project

  Steel scaffolding planks as tools for building construction should not only have the security, also want to have durability. Because whether small or big buildings, is not can be built overnight, need several months or even a year or two to complete. But steel scaffolding planks as working people use a tool, to walk on it every day, and the erosion by rain and snow and the sun exposure. If steel board does not have

  2017-07-17
• 

  Quality Check Standards of Scaffolding Planks in the Real Construction

  1. The appearance of hot dip galvanized steel scaffolding planks size length is not restricted, generally width is 240 mm, 250 mm, height 65 mm, 50 mm respectively. Steel scaffolding planks dimension allows error: should not be more than + 3 mm in length, width 2. Steel scaffolding planks frilled edge corners should be maintain 90 °, the deviation is unfavorable exceed.

  2017-07-16
• 

  What Are the Price of Scaffolding Planks with Hooks in the Project

  Becomes more and more popular now in order to adapt to the label of any standard system frame - the need of socket type ringlock scaffolding, as a result of the ringlock scaffolding rail module are fixed, so we hook steel scaffolding planks directly at its center distance. But due to the different specifications and modulus also leads to different specifications of the hook steel board price .In this paper, we simply with the analysis of the market situation in:

  2017-07-16
• 

  What Are the Unique Advantages of Ringlock Scaffolding in the Construction

  Ringlock scaffold accessories application range is very wide, in bridge engineering, building, elevated water tower, power plants, refineries, etc and some special workshop design support, so let's see what are the unique advantages of it: (1) ringlock scaffold fastener is less, basically in during operations erection and dismantling of more convenient, can be suitable for all kinds of building structure, authors.

  2017-07-13