ADTO News

• 

  Highly Satisfied for the Customers Who Buy the Ringlock Scaffolding Products

  From several aspects to ensure that its structure invariance and security. Application of ringlock scaffold where to begin? May have a lot of users for this kind of construction scaffolding operation is not the length of the application of professional, safe way, and build requirements regarding its application such as length are not often grasp. Below about ringlock scaffold application operation means. To supply you with structure function reliable ringlock scaffold, the company supplies the construction scaffolding structure reasonable, carrying capacity is strong,

  2017-08-13
• 

  What the Customers Need is What ADTO is Producing of the Ringlock Scaffolding

  Scaffolding equipment design reasonable structure, high safety performance, after-sales service guarantee, you can rest assured to trust the company! When it comes to ringlock scaffolding, everyone not unfamiliar, affirm its name but for this kind of scaffolding equipment application features in detail, do you know? Follow below small make up together to carefully understand the ringlock scaffold. This ringlock scaffold generally consists of steel pipes, rail, upright, ringlock buckle joint, etc. Basic set-up requirements and fastener type steel pipe scaffold structure, basic similar, mainly is the

  2017-08-13
• 

  Strict Control on the Producing Quality of Ringlock Scaffolding

  Ringlock scaffolding level straight plug length should be not less than 100 mm, stretched length should not be less than 40 mm, side should with contact poling steel tube surface formed a good surface. Ringlock what is the function of scaffold and use, we need to know is a problem, because this product is either in industrial or in our lives has a very important role, has brought many benefits for us, so we are going to have some natural fully understanding, so as to better put into use.

  2017-08-10
• 

  What Are the Common Problems You Might See in the Scaffolding Products

  Design (1) to heavy scaffold should have a clear understanding, generally, if the thickness of the floor more than 300 mm, should consider the design according to the heavy scaffolding, scaffolding load more than 15 kN/was, the design should organize expert argumentation. To separate the parts of the steel tube length changes on the bearing, support for template should be considered: the

  2017-08-10
• 

  The Calculation of Building Volume and Cost for the Scaffolding

  A, scaffolding using range Construction area of calculation in accordance with the rules commonly, can calculate the construction area of industrial and civil construction projects, shall be implemented by all the composite scaffold quota project. Second, the project including the content of the scaffold quota Scaffolding quota in the project, including the foundation of the building, the exterior masonry, pouring concrete, component assembly, the height is 3.6 m above the metope whitewash use

  2017-08-09
• 

  What Are the Other Relevant Provisions of Scaffolding in the Market

  1, building scaffolding, height: the natural outdoor floor to the roof eaves wall surface (or daughter) crest elevation. 2, the height of the building: the bottom or middle tier, this layer design indoor ground to the upper ground elevation; The top since this layer design indoor ground to the top of the roof plate height. 3, vertical protective frame, according to the natural ground level ground to the top layer bar positioned between the height, multiplied by the actual erection of calculate with square metre length. With the help of outside scaffolding, calculated at 50%;Set-up, separately calculated at

  2017-08-09
• 

  Several Tips on How to Use the Scaffolding Safely in the Project

  Japan has begun a large number of applications in 50 s fastener type steel pipe scaffold, to 50 s, fastener type steel pipe scaffold are dominant, due to the ongoing casualty accidents, it was reported in casualties of up to 2856 people a year, therefore, the safety of the scaffolding problem has drawn great attention of relevant government departments. Early '60 s, due to the convenient operation doors scaffold, bearing performance good, safe and reliable, especially the Labour ministry use make the rules, the safety of the scaffolding doors

  2017-08-08
• 

  What Are the Common Problems in the Scaffolding Application Process

  1, the product quality problems Professional scaffolding factory is rarely in our country, many of the steel tube, fastener factory equipment humble, backward production technology, low level of technology, it is difficult to guarantee product quality. At present mostly steel pipe factory production steel pipe under the wall thickness of 3.0 mm, if the application again after years of construction, steel tube corrosion make wall thickness thinning, the steel tube will be scaffolding safety hidden trouble.

  2017-08-08
• 

  What Are the Requirements to Erect the Scaffolding Tubes in the Project

  1, steel fasteners, scaffolding, should be paid attention to in the foundation level solid, and set up base plate, and have reliable drainage measures to prevent the water soak a foundation. 2, according to the situation of rod set up the wall and load size, the commonly used open type double row scaffolding rod. Horizontal spacing generally 1.05 ~ 1.55 m, building scaffolding interval is 1.20 ~ 1.35 m, commonly decoration or building, decoration and scaffolding generally

  2017-08-07
• 

  The Construction Technology and Acceptance Inspection for the Scaffolding

  1, technical parameters, including the various technical parameters of steel tube scaffold engineering, specific include: the calculated length, spacing of the steel, steel tube pole spacing in the longitudinal and lateral direction, vertical and lateral horizontal pole spacing, sweeping bar spacing, diagonal to the layout of the bracing and data, such as the wall bar set, and so on. Due to the components of technical parameters are inconsistent, floor type, attached type and cantilever type three kinds, table lists various technical parameters are available, and concise,

  2017-08-07
• 

  How to Check If the Scaffolding Complys with National Project Standard

  The construction technology and acceptance inspection 1, technical parameters, including the various technical parameters of steel tube scaffold engineering, specific include: the calculated length, spacing of the steel, steel tube pole spacing in the longitudinal and lateral direction, vertical and lateral horizontal pole spacing, sweeping bar spacing, diagonal to the layout of the bracing and data, such as the wall bar set, and so on.

  2017-08-06
• 

  The Criteria for the Erection of Scaffolding System in the Project

  1, the material of steel pipe and specifications Generally adopt appropriate GBT00 ordinary carbon structural technical conditions of technical requirements of A3 steel, flat and smooth appearance, no crack, delamination, distorted, make hole section and is less than 0.5 mm steel pipe corrosion degree, must have the manufacturer's quality certificate or rental unit quality assurance certificate. All fasteners shall be preferred 48 mm outside diameter, wall thickness 3-3.5 mm of welded steel pipe used for stud, the ledger and diagonal length of steel tube with 4-4.5 m advisable for small

  2017-08-06
• 

  Scaffolding Tube Standard Used in the Scaffolding Projects on the Site

  Steel pipe scaffold Is what we call the fastener type steel pipe scaffolding tube, and bear the load of composed of fasteners and steel pipe scaffold with the racks. Brace: install or pouring concrete in steel structure building, authors such as bearing bracket. And fastener type steel pipe scaffold: in vertical and horizontal direction, by not less than 3 row poling and scissors and horizontal bar, horizontal, vertical bracing the scaffold, fasteners, etc. The

  2017-08-02
• 

  What Are the Features of ADTO Scaffolding Coupler for Scaffolding Tube

  1, ADTO steel pipe butt fastener with security advantage, quality advantage, brand advantage, this kind of fasteners with good product advantage, can make the construction show a good advantage. Steel pipe scaffold of inferior rents save worry, energy saving, the rental income than iron ringlock, so this kind of the good characteristics of scaffold fasteners is more widely used in construction. 2, ADTO docking fastener easy maintenance. Because the ringlock itself has the characteristics of

  2017-08-02
• 

  ADTO is More Reliable for You to Buy Scaffolding Tubes for the Project

  National standard scaffolding pipe procurement must be have higher request for the scaffold quality, be sure to choose when purchasing the manufacturers don't be to fool the quality is not reliable manufacturer. element extension building materials group is a large has a excellent scaffold r&d team , the scaffolding products and related with meticulous research and development and production. ADTO company production of gb frame tube is the construction site one of the most used tube

  2017-08-01