Live Chat
ADTO News
-
The Seven Principles of Straight Threaded Steel Bar Connection Sleeve Connection
1. The straight-threaded steel bar connection sleeve joint should be set at the place where the force is less, and fewer joints should be set on the same steel bar. 2. The tie rods (axial tension and small eccentric tension members) of the wooden frame and the arch shall not be bound and lap joints. 3. When the diameter of the tensile steel bar is greater than 28mm and the diameter of the compression steel bar is greater than 32mm, it is not appropriate to use the lashing lap joint;
2022-06-16 -
The Traditional Rebar Connection Method Will Be Replaced by the Rebar Connection Sleeve
The traditional lap joint, welding, and other connection methods are replaced by steel connecting sleeves so that they can meet the requirements of the rapid development of the construction industry in terms of connection quality, efficiency, and operability, and further promote the technological innovation of the entire industry.
2022-06-15 -
Importance and Requirements of Steel Connecting Sleeve
The design basis of the steel bar connection sleeve has a high dimensional tolerance level, IT4 level, and the surface roughness is 0.8. These technical conditions are to ensure the matching accuracy of the straight thread connection sleeve and the bearing and the smooth movement.
2022-05-31 -
Classification and Advantages of Steel Rebar Sleeves
With the rapid development of the construction industry, traditional steel bar connection methods can no longer meet the needs in terms of connection quality, connection efficiency, and operability. The continuous updating of steel bar connection sleeve technology has driven the progress of the entire construction industry. Today, I will introduce the classification and advantages of steel threaded sleeves in detail.
2022-05-31 -
How to Identify Whether the Steel Straight Thread Sleeve is Qualified？
Steel bar straight threaded sleeves play the role of connecting steel bars in construction, and they are matched with different types of steel bars, so it is very important to select a batch of steel bar sleeves that meet the needs of the project, so I will popularize the identification of steel bar straight-A method for qualifying threaded sleeves.
2022-05-30 -
Installation Steps of Steel Bar Straight Thread Sleeve
A Steel bar straight thread sleeve is a kind of steel bar processing machine that has been widely used in the construction industry in recent years. During the use process, we must pay attention to the installation matters, which can avoid some technical problems. Does not affect the progress of the project.
2022-05-27 -
Differences between the Connection of Straight Thread Sleeve and Cold Extrusion Sleeve
The connection of the steel bar straight thread sleeve is to peel off a part of the longitudinal and transverse ribs at the end of the steel bar to be connected by cutting with a thread rolling machine, and then directly roll it into an ordinary straight thread and connect it with a straight thread sleeve. The technology is efficient, convenient, fast, saves energy and reduces consumption, improves efficiency, and the connection quality is stable and reliable.
2022-05-26 -
What is the Difference between Cold Rolled Sheets And Hot Rolled Sheets?
The main differences between the cold-rolled sheets and hot-rolled sheets are as follows:
2022-05-25 -
Differences Between Aluminum Magnesium Manganese Plate and Galvanized Steel Plate
Aluminum-magnesium-manganese plates are more and more widely used, but some customers do not know the difference between aluminum-magnesium-manganese plates and galvanized steel plates. Today we will compare them in detail from the following aspects.
2022-05-24 -
Features of Steel Straight Thread Sleeve Connection
The connection method of the straight thread sleeve is to peel off a part of the longitudinal and transverse ribs at the end of the steel bar to be connected by cutting with a thread rolling machine, and then directly roll it into an ordinary straight thread and connect it with a special straight thread sleeve, forming the connection of steel bars.
2022-05-23 -
What’s the Difference between Octagonal and Ringlock Scaffolding?
Most of the socket-type buckle-type scaffolding connecting plates are mainly ringlock plates, and there is another kind of connecting plate that is octagonal.
2022-05-17 -
Usage of Stainless Steel Seamless Pipe
Stainless steel seamless pipe is a long strip of steel with a hollow section and no joints around it.
2022-05-11 -
Why Use Coated PPGI Steel Coil?
1. There are various colors and patterns of PPGI coils to meet different styles and uses. 2. The colorful coatings also make PPGI steel more corrosion-resistant and long-lasting. 3. PPGI steel coil has great processing performance. So you can make coils into different products according to your need. 4. Prepainted galvanized steel coil also keeps the strength of steel, which makes it tough and safe. 5. PPGI coated coil is light in weight so that it is easy to transport and install. 6. Compared to PPGL steel, it is more affordable.
2022-04-27 -
What Should We Do When Store Building Wood Formwork in Winter?
In winter, when the temperature gets colder, the building construction will be reduced accordingly. In winter, it is necessary to save the wooden formwork, which saves money and is also conducive to construction use in the spring of the following year. So how should wood formwork be stored in winter?
2022-04-24 -
What Problems Should We Notice When Installing Steel Springboards?
What problems should be paid attention to when installing steel springboards? Let's take a look together.
2022-04-22