Live Chat
ADTO News
-
How to Select Concrete Formwork System in Construction Projects?
Formwork system is defined as a solid barrier that helps to shape the concrete until it hardens and get a certain strength. The concrete takes the shape of the formwork system or molds in which it is contained. When it comes to the selection of concrete formwork systems, people think that it is dependent on the application of the formwork system in “where” and by what measures. The concrete formwork system selected for a construction project is dependent on the following points:
2018-11-19 -
Why are There So Many Different Types of Scaffolding All Over the World?
There are many types of scaffolding systems used in construction projects all over the world. Sometimes a specific type of scaffolding is commonly used because the construction tools are available and a large number of people get a basic understanding of the scaffolding system.
2018-11-17 -
For scaffolding safety construction, you can’t do these things
For safety construction of scaffolding system, you can't do these things as follows
2018-11-17 -
Things you should do for scaffolding safety construction
Before getting on a scaffold check to make sure that a competent person has inspected the scaffold before the work shift and that it is safe to use and in proper working order. Scaffolds can only be erected, dismantled, altered or moved under the direct supervision of a competent person by trained personnel. If you are ever unsure regarding the safety of a scaffold check with a supervisor before use.
2018-11-17 -
How to Erect and Disassemble Formwork System?
Operations for erecting formwork system normally involves the following steps: 1.Propping the acrow props and centering the whole system 2.Provision of camber 3.Shuttering 4.Cleaning and surface treatment
2018-11-16 -
Things Need to be Considered when Designing Formwork System
Before the application and design of formwork system, one should have a basic understanding of how pouring materials in the formwork system exert pressure on the whole system. It is reported that concrete exert lateral pressure on the formwork system, and the whole formwork system is designed according to these lateral forces.
2018-11-16 -
What’re the Basic Requirements Should a Good Formwork System Satisfy?
A good formwork system should have the following characteristics:
2018-11-15 -
The Division of Formwork System According to Materials
Formwork system, or just so-called shuttering, is a temporary structure used to shape the pouring materials (commonly referred to as concrete). There are many kinds of formwork system in the world. Today we will make a brief introduction on different formwork systems.
2018-11-15 -
How Many Types of Scaffolding are Used in the Construction Project?
Scaffolding system used in construction projects can mainly be divided into the following types:
2018-11-14 -
Something You Need to Know About Scaffolding
Scaffolding is a kind of temporary structure which used to hold the construction workers and construction tools or construction materials. Different kinds of scaffolding system are used with different building structure in different working conditions.
2018-11-14 -
Technological Gap between Chinese Scaffolding and Japanese Scaffolding
The technological level of scaffolding manufacturing in China is far behind that in Japan. There are only 2 to 3 steel formwork manufacturers in Japan, but more than 450 frame scaffolding manufacturers and scaffolding accessory manufacturers. In the 1950s, single-pipe tubular scaffolding was mainly used in Japan. Due to the frequent occurrence of safety accidents by using tubular scaffolding, the frame scaffolding had been widely used in the 1960s.
2018-11-14 -
ADTO Plastic Formwork System
ADTO plastic formwork system is fabricated from high strength plastic. This kind of plastic materials is that neither placed materials adhered to it nor chemical reactions occur between poured materials and the plastic formwork. And consequently, there will be no residue on the surface of the reinforced concrete element.
2018-11-13 -
Do You Know How to Remove Concrete Formwork System?
With the development of the construction industry, formwork system, an essential supporting system tools to shape the concrete, has been developed through the forms of wooden formwork, steel formwork, and aluminum formwork.etc. Everyone knows the functions of the formwork system, but does anyone of you know how to remove the formwork system? Below we ADTO GROUP will show you the answer.
2018-11-13 -
ADTO Plastic Formwork System for Concrete
ADTO Formwork System is the construction tool used to hold freshly placed concrete at its position until it attains enough strength. With the help of the formwork system, concrete can be easily manipulated. Various shapes and forms will be constructed under the action of the formwork system.
2018-11-13 -
Scaffolding and Formwork Developing Process in Japan
Scaffolding manufacturers from Japan have researched and developed varies specifications of scaffolding system and scaffolding accessories. There are at least 500 scaffolding leasing company and scaffolding accessories manufacturers in Japan, which is much more than formwork system manufacturers. For example, the frame scaffolding can be divided into walk through frame scaffolding and mason frame scaffolding. The scaffolds with socket and spigot joints can be divided into cuplock scaffolding, ringlock scaffolding, jack scaffolding, slotted scaffolding and tubular scaffolding. Most scaffolding couplers are steel plate couplers, which have a lot of types and wide application range. Among all kinds of scaffolding, frame scaffolding is still the main part, and project usage amount accounts for about 50%.
2018-11-09