
ADTO News
-
What is a Galvanized Steel Pipe?
Galvanized steel pipe is a steel pipe that has been coated with a zinc layer. The zinc layer coating protects the steel pipe from corrosion and rust. The zinc layer provides a barrier against corrosion so that the pipe can be used in the outdoor environmental conditions with satisfied service life.
2018-11-29 -
How to Manufacture Cold Rolled Steel Pipe?
Cold rolling is usually carried out at room temperature, which has the additional function of machining hardening and strengthening materials, thus further improving the mechanical properties of materials. It also improves surface finish and allows for tighter tolerances. However, the ductility of normal temperature steel is not as good as that of hot rolled steel. Cold rolled products usually include similar hot rolled products, such as sheet and bar, but are usually smaller.
2018-11-28 -
Do You Know the Difference between Steel Pipe and Steel Tube?
“What's the difference between a tube and a pipe?" This is a question we often are asked by our clients. Although tubes and pipes look similar, they are actually quite different in nomenclature and size. Remember that tubes and pipes are rarely interchangeable. The main differences between the two products can be compared as follow:
2018-11-28 -
Do You Know the Manufacturing Process of LSAW Pipe?
LSAW steel pipe refers to the steel pipe manufacturing with “Longitudinally Submerged ARC Welded Methods”. Its full name is “Longitudinally submerged ARC welded pipe”. This passage is written to introduce the manufacturing process of LSAW steel pipe.
2018-11-27 -
Things You Don’t Know about Manufacturing Process of SSAW Pipe
SSAW steel pipe stands for Spirally Submerged Arc Welding pipe, which is mainly used in petroleum and natural gas industry to transport flammable and non-flammable liquid and steel construction. The manufacturing process of SSAW steel pipe can be listed as below:
2018-11-27 -
How to Identify Seamless or ERW Steel pipes?
ADTO ERW pipes mean Electric Resistance Welded Pipe. ERW pipe is a type of tube manufacturing from the metal piece with electrical resistance welded technology. ADTO ERW pipes are widely used in various engineering purposes, fencing, scaffolding, line pipes. Etc. ADTO seamless pipes is a kind of steel pipe product without any seam both on the surface and the internal face of the pipe. ADTO seamless pipes are widely applied in water transport projects, oil transports projects, and gas transports projects due to its seamless characteristic.
2018-11-26 -
Raw Materials for Manufacturing Seamless Pipes & ERW Pipes
different materials used to manufacture ERW steel pie and Seamless steel pipe
2018-11-26 -
What is Insulating Concrete Formwork?
We will talk about something about another new kind of formwork: insulating formwork.
2018-11-23 -
Advantages of Insulating Concrete Formwork
advantages of insulating concrete forwork for construction personnel and occupiers
2018-11-23 -
Fabric Formwork: A New Type of Formwork
Today, we want to introduce a new kind of formwork you have never heard about: fabric formwork.
2018-11-22 -
Aluminum Formwork VS Plastics Formwork
Today, we will make a comparison between these two kinds of material which used to manufacture the formwork system.
2018-11-21 -
Magnesia Formwork, A Kind of New Formwork system
Magnesium is another metal material which is used for manufacturing formwork system. Magnesium is not directly used for manufacturing formwork and is used with the combination of Oxygen atoms which forms Magnesium Oxide, usually called Magnesia or MgO.
2018-11-21 -
How to Choose Formwork Materials between Plywood and Steel?
Plywood is a manufactured product of timber. It is also used for formwork system. It consists of a number of veneer sheets or plies in layers. Nowadays, the use of plywood formwork increases especially for film faced plywood. The reason behind it is that the plywood formwork provides smooth finish when compared to normal timber formwork. Therefore, finishing cost may reduce by the use of film faced plywood. Film faced plywood formwork manufactured by ADTOGROUP has following advantages:
2018-11-20 -
The Reason why We not Choose Timber Formwork
Timber is the most commonly used construction materials in the past. It is often used to fabricate props, formwork, scaffolding planks, scaffolding standards.etc. Timber logs, lumber, etc. are used as bracing members from ancient times. So, the formwork or scaffolding manufactured of timber are also called traditional formwork or traditional scaffolding. It is the most economical material used for formwork. Timber is more accessible for the people in remote mountain area compared to steel or aluminum. Therefore, it is still used in sites as formwork material for a number of years. The methods of constructing timber framework are well known to the workers.
2018-11-20 -
What Can We Do to Protect Our Construction Workers?
According to the statistics, approximately 2.3 million construction workers frequently work on scaffolding system. Scaffold-related accidents cause about 4,500 injuries and 50 deaths every year. They also result in $90 million in lost workdays. Statistics also show 72% of workers injured in scaffold accidents attributed the accident to the scaffolding planks or scaffolding couplers giving way, or to the employee slipping or being struck by a falling object. These situations could be prevented with proper compliance with scaffolding safety operation standards. Taking steps to ensure compliance with the scaffolding standards could help employers protect workers and prevent significant costs. The following points are common scaffolding hazards:
2018-11-19