
ADTO News
-
Ten Problems with Scaffolding
This passage has listed ten problems with scaffolding
2018-12-24 -
Types of Scaffolding Commonly Used in Construction Project
Different types of scaffolding and formwork support for different purposes is used for different types of construction projects. But do you know how many types of scaffolding commonly used in construction projects? Below we will show you an answer.
2018-12-24 -
Introduction of Spiral Welded Pipe
Spiral Weld Pipe, as the name implies, is a steel pipe which has a seam running its entire length in a spiral form. Spiral Weld Pipe is produced in accordance with the dimensional and tolerance requirements of various ASTM, AWWA, and API Specifications. Spiral Weld Pipe is used for dredging, slurry, water, and other pipelines, as well as piling and structural applications.
2018-12-21 -
Different Applications of Various Seamless Steel Pipe Materials
Seamless Steel Pipes can be divided into following types due to their different applications.
2018-12-21 -
Is It Necessary to Replace Conventional Scaffolding with Ringlock Scaffolding?
Current Situation: Ringlock scaffolding is widely used by a lot of construction units. And it also gets a good evaluation. Ringlock scaffolding is recommended to be used in the construction project by the government. While some person in charge of the project think it is difficult for them to use ringlock scaffolding as they have got used to tubular scaffolding. Question 1. Is it necessary to replace tubular scaffolding with ringlock scaffolding? 2. Will ringlock scaffolding cost much more if replaced? 3. What if the workers don’t know how to erect it after replacement?
2018-12-20 -
Does Ringlock Scaffolding Have a Better Performance than Tubular Scaffolding?
Does Ringlock Scaffolding Have a Better Performance than Tubular Scaffolding? The answer is surely the yes.
2018-12-20 -
Four Big Differences between SAW Pipes and ERW Pipes
The manufacturing processes of SAW pipes (LSAW, SSAW) and ERW pipes is entirely different. Below are the four big differences between SAW PIPES and ERW PIPES.
2018-12-19 -
Plywood Products of ADTO GROUP
Plywood is pieces of wood made of three or more layers of veneer joined with glue and usually laid with the grain of adjoining plies at right angles. Almost always an odd number of plies are used to provide balanced construction. Some of the major structural uses for plywood are:
2018-12-18 -
Methods for Erecting Formwork System
One side is erected using only on the upper and lower pin and wedge connection. Later, ties are inserted at the other connections and fixed with pin and wedge. Then the previously installed pins are removed and ties inserted and pinned. Subsequently, panels for the other side are inserted between the existing ties and fixed with pins and wedges
2018-12-18 -
Components and Accessories of ADTO Aluminum Formwork
a detail list of ADTO Aluminum Formwork System's components and accessories
2018-12-17 -
ADTO Aluminum Formwork! The Erection Steps and It’s Advantages
the erection method of ADTO Aluminum Formwork and an introduction to its advantages.
2018-12-17 -
The Comparison between Aluminum Formwork and Conventional Formwork
The comparison between Aluminum Formwork and conventional formwork is listed clearly in the below table.
2018-12-14 -
The Erecting Process of ADTO Aluminum Formwork
The ADTO Aluminum Formwork Systems are designed by the professional Formwork Manufacturers ADTO GROUP. ADTO GROUP is a leading supplier of construction materials. We offer high-quality Aluminum Formwork System for sale. Today, we are going to discuss something about the erecting process of ADTO Aluminum Formwork System.
2018-12-14 -
Applications and Merits of Tubular Scaffolding
Tubular scaffolding is a kind of scaffolding system specially designed for construction purposes. The applications and Merit of tubular scaffolding can be listed as below.
2018-12-13 -
Causes of Formwork Failure and Methods to Keep the Concrete’s Integrity
Formwork system failures are the cause of many accidents and building failures that occur during concrete construction, usually when freshly poured concrete is being placed. Generally, some unexpected event causes one member to fail, then others become overloaded or misaligned and the entire formwork structure collapses. In designing and building the formwork system, the construction personnel should aim for the maximum economy without sacrificing quality or safety. Size, shape, and alignment of slabs, beams, and other concrete structural elements depend on accurate construction of the forms.
2018-12-12