
ADTO News
-
Suggestions on Safe Use of Ringlock Scaffolding Tower
Before operatives can be allowed to use a Ringlock Scaffolding Stair Tower, you should bear all the following suggestions in mind.
2019-01-02 -
Ringlock Scaffolding Components’ Storage and Handling
Suggestions on Ringlock Scaffolding Components’ Storage and Handling
2019-01-02 -
The Safety Guideline Before Disassembling Ringlock Scaffolding
We have made a brief introduction about how to erect Ringlock Scaffolding before. Today, we will write a passage about the guideline before disassembling Ringlock Scaffolding.
2018-12-29 -
Things You Should “Never” Do When Erect Ringlock Scaffolding
Things You Should “Never” Do When Erect Ringlock Scaffolding
2018-12-28 -
Things You Should “ALWAYS” Remember When Erecting Ringlock Scaffolding
Things you should “ALWAYS” remember when erecting ringlock scaffolding
2018-12-28 -
How to Utilize the Characteristic of Components to Erect Ringlock Scaffolding?
Irrespective of whether a platform is required on the lowest Spigot it is recommended that the Scaffolding Planks are installed at this level. This ensures that the Scaffolding is square and level prior to erection and it also provides plan stiffness. This is most important, especially when the maximum height of the Scaffolding is above eight lifts. The installation of these Scaffolding Planks ensures that the out of alignment eccentricities are kept to a minimum in order for the Scaffolding to attain the maximum permissible height for each recommended tie pattern.
2018-12-28 -
The Function of Diagonal Bracing when Erecting Ringlock Scaffolding
Braces are generally fitted in one bay from the bottom to the top without any break in between. This bracing pattern is then repeated every fifth bay. Alternatively, the braces can commence in the lowest outside bay. And it can also continue as a straight line until the far outside edge of the Ringlock scaffolding is reached. The bracing then repeats in this manner from the next lift above until the top of the Ringlock Scaffolding is reached. For very long Scaffolding Pipes it is preferable to start opposing bracing at both ends and work towards the middle of the facade.
2018-12-28 -
Things Need to Note when Assembling Ringlock Scaffolding Planks
Irrespective of whether a platform is required on the lowest Spigot it is recommended that the Scaffolding Planks are installed at this level. This ensures that the Ringlock Scaffolding is square and level prior to erection and it also provides plan stiffness. This is most important, especially when the maximum height of the Ringlock Scaffolding is above eight lifts. The installation of these Scaffolding Planks ensures that the out of alignment eccentricities are kept to a minimum in order for the Ringlock Scaffolding to attain the maximum permissible height for each recommended tie pattern.
2018-12-27 -
Preparations before Erecting ADTO Ringlock Scaffolding
preparations before the erection ADTO ringlock scaffolding
2018-12-26 -
Five Problems and Answers Need to Bear in Construction Personnel’s Mind
1. Which conditions qualified a scaffolding erecting worker? Answer: The scaffolding erecting workers must be the professional scaffolders who have got the qualification of “Rules for the assessment and management of safety technology for special operation personnel” according to the current national standard. Workers should get a periodic physical examination. Only the qualified workers can take up posts with certificates.
2018-12-25 -
Safety Problems when Using Scaffolding and Its Solutions
1. What safety devices shall be provided when using the scaffold of the hanging basket? Answer: brake, stroke limiter, security lock, anti-tilt device, safety devices against overloading.
2018-12-25 -
Ten Problems with Scaffolding
This passage has listed ten problems with scaffolding
2018-12-24 -
Types of Scaffolding Commonly Used in Construction Project
Different types of scaffolding and formwork support for different purposes is used for different types of construction projects. But do you know how many types of scaffolding commonly used in construction projects? Below we will show you an answer.
2018-12-24 -
Introduction of Spiral Welded Pipe
Spiral Weld Pipe, as the name implies, is a steel pipe which has a seam running its entire length in a spiral form. Spiral Weld Pipe is produced in accordance with the dimensional and tolerance requirements of various ASTM, AWWA, and API Specifications. Spiral Weld Pipe is used for dredging, slurry, water, and other pipelines, as well as piling and structural applications.
2018-12-21 -
Different Applications of Various Seamless Steel Pipe Materials
Seamless Steel Pipes can be divided into following types due to their different applications.
2018-12-21