Live Chat
ADTO News
-
How to Arrange Details in Full Hall Scaffolding Drawings
The full hall scaffolding is a kind of equipment that can help to build the whole house. It is more stable than others with ideal application effect. The drawing of it is due during designation and the relevant regulations shall be set during specific erection. The full hall scaffolding is used for decoration construction in large space buildings such as
2016-04-25 -
How to Build Scaffolding Planks in A Right Way
Scaffolding planks erection at the bottom of each pole should be set base plate. Scaffolding pole based not on the same height, it must be the height of the longitudinal sweep shot to the lower pole and extended two fixed height difference should not exceed 1m. Pole axis distance by the slope to the top of the slope should not be less than 500mm.
2016-04-25 -
How to ErectHorizontal Scaffolding Tube on a Non-Master Node
1 Horizontal scaffolding tube on a non-master node at the operational level should support needed scaffolding plank of equally spaced, maximum spacing should not exceed 1/2 of vertical distance; 2 When using stamped steel scaffold boards, wooden planks, bamboo scaffold boards Strings, horizontal bar at both ends of double scaffolding shall be fixed at right angle fastener longitudinal horizontal rod; end of the single row of horizontal bar of scaffolding application of rectangular
2016-04-22 -
General Requirements of Erecting Scaffolding Tubes
1. Steel fasteners scaffolding tube erection should pay attention to a flat solid foundation, the base, and the plate, and reliable drainage measures to prevent water soaking foundation. 2. According to the setting of the rod connecting wall and load size, a common open double scaffolding pole. Horizontal distance is generally 1.05 ~ 1.55m, masonry scaffolding step distance is generally 1.20 ~ 1.35m or decorative masonry, decorative dual-use of scaffolding is generally
2016-04-22 -
Surface Treatment of Mobile Scaffolding Tube Products
1. HDG Mobile scaffolding accessories useful life of about 10 years, the surface does not require maintenance, in use, is not subject to any restrictions. But the high cost of raw materials need to adopt more complex. In actual use, there are many mobile scaffolding accessories as deformation, and other reasons, resulting in a lot of accessories, very easy to use
2016-04-21 -
What are Advantages of Ringlock Scaffolding Tube Propping System
Construction site in the main application for the Frame Scaffolding, scaffolding erection as simple and quick, low cost. Ringlock (scaffolding) template support system in the bond pad button (Scaffold Frame) stencil production and sales experience, according to the market demand for the development of heavy-duty
2016-04-21 -
What are the Drawbacks of Steel Tubular Scaffolding
1, steel versatility poor. Large steel ships are designed for a project, its size is only applicable to the project, you can not use the turnover as steel a large investment.2 large steel bulky, heavy, off-site long-distance transport difficulties. Construction site requires a large storage area for steel and if on a narrow construction area, the use of large steel is inappropriate.
2016-04-20 -
Requirements and Measures of Scaffolding Fireproof
Various types of scaffolding fire should work closely with the construction site fire protection measures should primarily do the following:1) scaffolding should be placed near a number of fire extinguishers and fire-fighting equipment, should understand the basic usage and basic knowledge of fire extinguishers. 2) must be cleared up on the scaffolding and Lee carried away construction debris around
2016-04-20 -
Types and Application of I Shape Steel Products
I shape steel is known for its intersection in the shape of I and it can be used as steel prop structure, structural materials such as structural ringlock scaffolding, fencing and floor material, handrails, foot bridge and working platform, wire separating frame, tool shaft and substation, etc.
2016-04-18 -
How to Make Sure the Scaffolding Full Safety in the Construction
At the construction site, scaffolding is used for the workers to work at height and it is easy to dismantle and install with good load bearing capacity. Then how to make sure the full safety of scaffolding in the construction? Check and inspect the working plan of construction unit and check the safety measures and calculation of load bearing capacity so the safety can be fully satisfied.
2016-04-18 -
How to Decide if the Ringlock Products are Qualified
The ringlock scaffolding product systems, which were originated from Germany, is coming into the market with the social background of "low carbon emission, environmental protection, safety and harmony to have a sustainable development". It is a hybrid of international high techniques and domestic construction requirement standards. And nowadays, it is in a fast developing state to lead the whole scaffolding industry to the development fashion of efficiency, safety and harmony.
2016-04-18 -
Scaffolding Erection Management Standard and Measures
if the erection height is over 1.5m, it shall use the scaffolding and the ringlock scaffolding type can be chosen according to the construction site. All the quality shall be checked with supervisors before the erection.all the scaffolders shall wear safety belts and ties to work under the supervision of appointed personnel. The whole construction process shall be checked and monitors by safety inspectors.scaffolding made of metal can connect with steel tube and spigot with a diameter of 40mm.
2016-04-18 -
What Factors Shall be Taken into Consideration When Erecting Scaffolding
Site factors, including:The distance to electrical cables, to process pipes and to the overhead obstacles 3 inches to the insulating cables of 300KV or below 10 inches to 300 to 500KV cables With appropriate access passage.
2016-04-15 -
What are the Differences Between Scaffolding Factory and Company
The first one is about the product kinds. There are many scaffolding kinds, including the steel tubular scaffolding, ringlock scaffolding, scaffolding with spigot, frame scaffolding and other type of inside scaffolding. The most widely used ringlock scaffoldings are the low carbon alloyed medal scaffolding, whose structural strength is higher than the traditional common carbon steel tube.
2016-04-15 -
Advantges of Using New Type Shear Wall in Ringlock Scaffolding
New building shear wall template support for fixing the name suggests is in situ concrete formwork construction, but due to the traditional construction, material utilization is low, the construction quality ofpersonnel is not high, the concrete pouring process often run mode situation.
2016-04-15