For the comprehensive steel tubular ringlock scaffolding, all the construction project, which can calculate its construction area according to the construction area calculation rules, the construction fees shall be determined according the quoted projects.

Composite ringlock scaffolding has been considering the masonry, casting, hoisting, plaster, paint, coating and other scaffolding. Based (independent plinth or equipment foundation and projection area of more than 20 m²) according to the basic layer and the scaffold cost multiplied by 50%, when using pumping concrete is according to the basic layer and the scaffold is multiplied by 40%.

The norm of the cornice height refers to the eaves drop height, height of flat roof refers to the bottom of the roof plate, protruding between the staircase, the tank roof is not high eaves. Cornice height in more than 50 m composite scaffold, external scaffolding is according to enhance comprehensive, practical construction is not at the same time, do not adjust.

Single scaffolding instructions

1. Everyone is calculated on the "construction area of calculation rule" construction area construction projects, but the construction organization design regulations require the erection of scaffolding, are calculated according to the corresponding single scaffold quota scaffolding amortization cost.

2. The division level protection, vertical protection, shall mean the scaffold, set-up, separate channels for vehicle and pedestrian passageway, and other objects of isolation protection. Closed construction refers to the hang besides safety net by nylon woven cloth, dense mesh net cover closed.

3. High hoisting frame project has been considering the vertical sealing material, not the other.