Live Chat
ADTO News
-
User Manual of Steel Tubular Scaffolding Product
Before the erection of scaffolding, it is necessary to rack tube, fasteners, bamboo, wire inspection, pipe rack severe bending, fastening severe erosion, crack, rot raft necessary scrapped shall not be used. The channel and the escalator at heightening reinforcement scaffolding bar should not obstruct passage. Planks and boards for a paved ramp to the rack rails. When the mobile scaffolding rental scaffolding when all the staff necessary for the scaffolding down, it was prohibited to move above
2016-05-27 -
Supporting Frame Types in the Scaffolding System
Frame Scaffolding erection of various types of material can support frame templates, including beam mode, formwork, slab mold and mold base box, etc., and is used extensively for Beam template holder. In the mold slab formwork and scaffold, support height> 4.0m, known as "high-carriage", the early dismantling requirements and device are known as "early brace formwork system support frame." Type fastener, bowls button and scaffoldings with steel materials can be used to construct the
2016-05-27 -
Advantages and Disadvantages of Frame Scaffolding System
This passage is written to tell you about the advantages and disadvantages of frame scaffolding system.
2016-05-26 -
What Are the Usages of Ringlock Scaffolding System
Multi-function. Depending on construction requirements, can be composed of a variety of modulus 0.6m group frame sizes and load single row, double scaffolding, cage, support columns construction equipment, materials and other features of the lift frame, and also can do curve placement . Scaffolding with adjustable lower bottom bracket, adjustable bracket, adjustable double early dismantling, cantilever beam, pick racks and other accessories in
2016-05-26 -
Construction Project Plan for the Tubular Scaffolding with Couplers
1.1 Foundation Treatment Scaffolding in this project are based on the open-air roof top and basement, the lower pole set skids, smooth layout must not be vacant. 1.2 Pole (1) The project scaffold with double single-pole. (2) Scaffolding must be set vertical and horizontal sweep shot. Longitudinal sweep shot right angle fasteners secured to the base from the epithelium of not more than 200mm at the pole.
2016-05-25 -
How to Connect the Scaffolding Body with Buildings
1, even pieces of the wall should be set close to the main node, deviated from the main node distance should not exceed 300mm; when more than 300mm, should take strengthening measures. When the wall pieces near the pole pitches of 1/2, it shall be adjusted. 2, the bottom wall pieces should be the first step in a longitudinal horizontal bar at the beginning
2016-05-25 -
How to Choose Right Material for Each Scaffolding Kind
l, steel landing foot palm rest, the choice of an outer diameter of 48mm, wall thickness 3.20mm, strength of steel grade Q235-A, steel surface should be flat and smooth, there should be no cracks, delimination, indentation, scratch and hard road bend, new used steel factory certification. Admission must be pre-construction scaffolding steel sampling, test units have sent the relevant national qualifications, conduct pipe bending, tensile and other mechanical test, after test results
2016-05-24 -
How to Prevent Scaffolding Accidents on the Construction Site
1. Scaffolding job level protection requirements Scaffold boards: scaffolding work layer should be paved scaffold board, between the board and the board immediately, away from the wall 120 ~ 150mm; when the layer between jobs and building scaffold boards gap is greater than 150mm, should take protective measures. Scaffold boards should generally be at least two layers, the upper layer of the job, the lower protective
2016-05-24 -
Erection Points of Scaffolding System Outside the Bank
Erection principles: (1)smooth vertical and horizontal links safe, reliable protection. (2) scaffolding erection tolerances shall meet the relevant requirements. (3) Every scissors across a width of 4 3-step, bridging between spaced not more than 15m. (4) pull contacts every step in the vertical direction, the horizontal spacing of three to four pole set up a. (5) of each rod erection a, erection
2016-05-23 -
How to Install SteelTubular Mobile Scaffolding System
Scaffolding Mobile scaffolding refers to the construction site for the workers to operate and resolve the vertical and horizontal transport and erection of various carriers. It has a simple assembly and disassembly system, good bearing performance, safe and reliable, the development of fast, mobile scaffold in a variety of new scaffolding, the development of the earliest usage is also speed up. Mobile scaffolding successfully developed by the United States at first
2016-05-23 -
Safety Building of Steel Tubular Ringock Scaffolding System
1. Multi-function. Depending on construction requirements, can be composed of a variety of modulus 0.6m group frame sizes and load single row, double scaffolding, cage, support columns construction equipment, materials and other features of the lift frame, and do curve placement . Scaffolding with adjustable lower bottom bracket, adjustable bracket, adjustable double early dismantling, cantilever beam, pick racks and other accessories used in conjunction with various
2016-05-20 -
What are the Features of Steel Tubular Ringlock Scaffolding System?
1, versatility: shape change according to specific construction requirements, composed of different groups frame size, shape and carrying capacity of single, double scaffolding, cage, support columns, and other construction equipment functions. 2, high efficacy: simple structure, easy disassembly, rapid and completely avoid the bolt fastener lost jobs and scattered damage, joint assembly removed faster than the more conventional block five times, rapid effort to fight the demolition workers with a hammer to complete all the work.
2016-05-20 -
Report on the Latest News of Mobile Scaffolding System
Mobile scaffolding erection should pay attention to flat solid foundation, the base plate and www.ebodu.net and reliable drainage measures to prevent water soaking foundation. Longitudinal horizontal bar should be set on the inside of the pole, its length should not be less than 3 www.bd-seo.com cross, longitudinal horizontal bar docking fastener can be used, also can overlap. Such as the butt fasteners method, the docking fasteners should be staggered; such as
2016-05-16 -
What Are Anti-skid Ability of Scaffolding Coupler System
1) Multi-function: according to the specific construction requirements, composed of different groups of frame size, shape and carrying capacity of single, double scaffolding, cage, support columns, material hoist frame, climbing scaffolding www.ahlonge.com cantilevered frame and other features of construction equipment. Can also be used to build facilities shed, feed www.30door.net shed, lighthouse and other structures. Particularly suitable for the erection of scaffolding and heavy curved support frame. 2) High Efficiency: common lever in up to 3130mm, weight 17www.chinagreem.com.07kg. Entire
2016-05-16 -
Brief Introduction of New Type Ringlock Scaffolding System
Scaffolding is an important tool construction, since the 1960s, our research and development of various forms of scaffolding have had a steel tubular scaffold, easy processing, easy handling, versatility and other advantages, the most common kind of scaffolding. But the scaffolding security guarantees poor, low construction efficiency, defined as the maximum installation height 33m, can not meet the construction needs high-rise buildings. With the continuous development of China's construction market, new emerging scaffold, as
2016-05-13