Live Chat
ADTO News
-
Scaffolding Components Erection Rules
1)The number of Cross Bridging and straddle poles shall be determined according to the table below. The width of each pair of Cross Bridging should not be less than 4 spans, and should not be less than 6m, the inclination Angle between the Diagonal Brace and the ground should be between 45 to 60 degree. 2)The extension length of the Cross Bridging shall be lap joint or butt joint, the lap joint length shall not be less than 1m, and shall be fixed with not less than 2 rotating fasteners. The distance from the edge of the end coupler cover plate to the end of the rod shall not be less than 100mm.
2019-12-23 -
The Footplate and Wall-connection Device Installment
1)The working layer’s footplate shall be paved fully, steadily, and solidly. 2)Stamping steel footplate, wooden footplate, bamboo string piece footplate, etc., shall be arranged on three horizontal rods. When the length of the footplate is less than 2m, two horizontal bars can be used to support, but both ends of the footplate and the horizontal bar should be fixed reliably to prevent tipping, and the length of the probe should be 150mm.
2019-12-23 -
Precautions of Scaffolding Erection
1)The longitudinal horizontal bar shall be set on the inside of the vertical bar, and the length of a single bar shall not be less than 3 spans. 2)The lengthening of the longitudinal horizontal bar shall be butt-joint or lap joint, and the joints of the two adjacent longitudinal horizontal bars shall not be arranged in the synchronous or the same span. The horizontal staggering distance of two adjacent joints across different spans shall not be less than 500mm; The distance between the center of each joint and the nearest main node shall not be greater than 1/3 of the longitudinal distance.
2019-12-20 -
Standardization of Scaffolding Erection
1) Construction plan and disclosure: Safety technology disclosure before scaffolding erection. 2) Scaffolding erection and demolition personnel must be qualified by the government department training and assessment and issued a legitimate certificate of professional scaffolding, regular physical examination after passing the certificate on duty. 3) Scaffolding personnel must wear a safety helmet, protective glasses, reflective vests, labor protection shoes, fasten the safety belt.
2019-12-20 -
Cantilever Scaffolding Erection Procedure
This passage is written to tell you the erection procedure of cantilever scaffolding. And we can discuss it from the following two parts.
2019-12-18 -
Guideline For Erecting and Dismantling Scaffolding
#22 The Dismantling Procedure of Scaffolding 1)Dismantle the scaffolding per floor from top to bottom. 2)Removing the wall-connecting device per floor. Apply the segmentation demolition. The height difference should not be more than 2 steps. A wall-connecting device should be added if the height difference is more than 2 steps. 3)No throwing to the ground.
2019-12-17 -
Scaffold Erecting and Dismantling Procedure
Part 1 The Guideline For Erecting scaffolding #1 Scaffolding bottom base should be 50 to 100mm higher than the natural floor. #2 Single row scaffolding only has one row of poles, and the one end of a short cross is suspended over a wall. Single row scaffold is generally used for internal wall plastering, paint and other projects that do not need to bear. Double-pole scaffolding consists of two rows of vertical and horizontal poles. Double-row scaffolds are generally used in masonry works. Masonry's work needs bearing.
2019-12-17 -
Comprehensive Interpretation of “Climbing Frame” Technique
“Climbing Frame”, the adhesive lifting scaffolding, has been widely used in the construction of high-rise buildings.
2019-12-16 -
Safety Tips About Erecting Scaffolding
Scaffolding safety has been a serious problem since there are more and more scaffolding accidents all over the world. Lots of customers ask the question: how to erect scaffolding safely? when they buy scaffolding for the first time. If you don't know how to use scaffolding safely, there are some tips for you to follow：
2019-10-23 -
4 Major Hazards Influenced Scaffold Safety
There are four major hazards associated with worker injuries that everyone needs to be aware of proper scaffold safety.
2019-07-09 -
Scaffold Safety: How to Reduce Scaffolding Accidents?
According to the statistic, 72% of workers injured in scaffold accidents attributed the accident either to the planking or support giving way, or to the employee slipping or being struck by a falling object. Scaffolds are integral to the construction industry with approximately 65% of the workforce involved in work from scaffolds. When used properly, scaffolds can save significant time and money.
2019-07-09 -
What Causes Scaffolding Collapses at Construction Sites?
Scaffolding is an integral part of many construction sites, elevating workers and materials during construction, maintenance, or repair projects. Unfortunately, when these structures fail, workers can sustain extremely serious injuries, including some that can result in permanent disabilities and long-term medical complications.
2019-07-08 -
How Can We Prevent Scaffolding Collapse Happening?
scaffolding tends to offer a comfortable and safe working arrangement as compared to working from ladders, leaning over edges and stretching overhead. While on the other hand working at height itself is a big danger and working on scaffold enhances the risk to it especially when safety regulations are ignored. Scaffolding accidents mainly involve people falling, incorrect operating procedures, environmental conditions and falling materials due to equipment failure.
2019-07-05 -
What Causes Scaffolding Collapse?
Scaffolding accidents mainly involve people falling, incorrect operating procedures, environmental conditions and falling materials due to equipment failure. The causes of scaffolding collapse include failures at attachment points, a parts failure, inadequate fall protection, improper construction or work rules, and changing environmental conditions (high winds, temperature extremes or the presence of toxic gases).
2019-07-05 -
ADTO Ringlock Scaffolding: the Best Choice Recommended By Scaffolding Manufacturers
Ringlock scaffolding is a kind of multi-purpose modular scaffolding system which can be used for all forms of access and support structures in the building and construction industries, shipbuilding, off-shore construction, and industrial maintenance.
2019-06-19