Live Chat
ADTO News
-
What are the advantages of ringlock scaffolding products.
easy and effective it is fast to assemble and remove the ringlock scaffolding products and it is flexible to alter them
2015-12-22 -
Cost Effective Advantage of the Ringlock Scaffolding System
Take the example of B1 main bridge of national highway 108, it has a structure of 4 spans prestress concrete successive beam and its geological terrain is complicated as the height tolerance along
2015-12-21 -
Economical cost comparison between ringlock scaffold and traditional scaffold
The ringlock scaffolding consists of main tubes, flat tubes, ledgers, diagonal tubes, standard base plate, auxiliary tubes, downside adjusting base plate, U jack head, handrails, ladders, connecting
2015-12-21 -
How to deal with lost of scaffolding coupler during construction process
For scaffolding coupler is lost, the scaffolding swivel coupler in the site materials is the most valuable, one of the lowest risk coefficient. For three reasons. First, large number, not stolen
2015-12-18 -
How to prevent and control problems for construction of scaffolding
Elements and accessories. Steel tubes and couplers are two major accessories in the steel tubular scaffolding with couplers.
2015-12-17 -
Is there any risk during the erection o scaffolding with couplers
Yes of course and there are multiple reasons causing these risks to happen. Working staff without approved licenses or lack safety consciousness or erection methods are not
2015-12-17 -
Dealing measures of construction safety risks on scaffolding with couplers
Risks during site construction period. Deformation of the supporting surface.
2015-12-16 -
How to deal with risks caused by the increasing working load during construction
Why does this happen? During the pouring and plastering process, if the accumulating load on the formwork platform is
2015-12-16 -
Key points for the calculation of steel tubular scaffolding with couplers
Ledger: strength and rigidity Connecting scaffolding coupler: anti-skid capacity and load-bearing capacity
2015-12-15 -
Regulations for the erection of flat tubes in the whole scaffolding structure
The transverse flat tubes which are not at the main joints on the working platform shall be better to be set at equal space according to the need of the supporting scaffolding and the maximum
2015-12-15 -
How to reduce the risks of the steel tubular scaffolding with couplers
Take control of the risks and you will reduce the risks to minimum Design risks. Design the load bearing risk.
2015-12-14 -
New codes of the steel tubular scaffolding with couplers
Steel tubular scaffolding with couplers can adopt couplers made of forgeable iron with accordance to national regulation of couplers
2015-12-14 -
Right ways to erect scaffolding working plane.
scaffolding tube manufacturers shall make sense that for the installation of inclined ladder above EL+20700, adopt hoop-type scaffold per Item 2.3.b and fix safety harness with safety rope.
2015-12-11 -
The construction arrangement of steel structure
Inclined ladEL+20700der (install from down to up) below –plane at EL+11200—plane at EL+12900—plane EL+15200—plane at EL+17700 (combined with equipment installation)
2015-12-11 -
The building construction and requirements of the cantilevered scaffolding
All the tubes and braces of steel tubular scaffolding shall use qualified steel couplers and it is forbidden to lead wires or other material for the fixation. Scaffolding braces and tubes material
2015-12-10