ADTO News
-
Comparison Between GI Scaffolding Planks and Other Metal
In electrochemical protective coating, coating close, durability of coating, coating, coating, protective coating and substrate, free economy and hot plating technology on the scale of steel board and other steel shape, adaptability, yield of high efficiency with other technology, unique advantage. According to the Japan association of galvanized a decade of atmosphere above test indicate: coating thickness is 86 microns of hot dip galvanized layer in heavy industry, Marine, outside the
2017-06-15 -
The Workers Safety Can Be Well Insured by the Scaffolding Planks
Now stem area of our country is gradually reducing, the main reason is in view of continuously, so according to the current trend of the country, because before we use wooden scaffold, he is not can use again, he can only be used once, can't use the second time, so it is a waste of resources. So people developed steel scaffolding, he can be repeated use, when we use, we don't have to worry about there are a lot of all kinds of unexpected situation happened, and then there is the
2017-06-14 -
What Are the Differences Between Steel Scaffolding Planks and Wood Ones
Steel scaffolding planks products apply to: secure channel outside the frame, petrochemical, shipbuilding step-stone use, etc The difference between the steel board and wood board where is it? 1. The security is higher Traditional wooden plank easy corrosion, easy burning, easy to crack, are prone to accidents; Angle steel sheet convenient rust off; While hot dip galvanized steel board has the advantages of corrosion resistance, prevent light. Company production of new steel scaffolding planks has the
2017-06-13 -
What Are the Requirements When Choosing the Scaffolding Plank Material
Galvanized steel scaffolding planks for use of the effect is very good, can be in many construction sites are now can see, they are can be repeated use, can no longer use after also can be recycled, so it can be effective to protect our limited resources, and they use the effect is very good. Galvanized steel scaffolding planks he is can be used in the construction industry and the anticorrosion construction, shipbuilding, ship repairing industry, oil platform installation
2017-06-13 -
How to Use the Scaffolding Planks to Make Sure It Can Play to the Full
Steel board, as a kind of indispensable building materials for construction, was widely welcomed, site construction personnel, but also has a lot of attention in the process of using, to ensure the safety of construction personnel, we provide you with some knowledge of safe use, for your reference. ADTO light steel scaffolding planks factory as a professional manufacturer of steel manufacturers to introduce you to steel scaffolding planks use safe sense, your life and convenient production.
2017-06-12 -
What Are the Features and Advantages of Galvanized Scaffolding Planks?
1. Good bearing performance. Hot dip galvanized steel scaffolding planks on the bearing performance is much higher than the bamboo and wooden scaffolding planks diving board, which is also testing by specialist. ADTO galvanizing scaffolding planks to high-standard product quality through the quality and technical supervision detection, the detection of galvanized steel scaffolding planks uniformly distributed load of 1250 n/m, the largest carrying capacity in 600.
2017-06-12 -
The Advantages of the Manufacturers to Make Scaffolding Planks in the Market
Turnover is much higher than wood scaffolding plank and bamboo scaffolding plank, skid resistance is better, the top of each steel scaffolding plank to have prevent slippery design, wood scaffolding plank and bamboo scaffolding plank is unable to do the nonskid treatment, steel scaffolding plank costs less than or equal to the cost of wooden scaffolding plank, steel scaffolding plank stability is better, will not be affected by temperature humidity strength, steel scaffolding plank do old still half of the residual value after processing.
2017-06-11 -
Scaffolding Tube Quality Determined by Scaffolding Strength and Flexibility
Scaffolding tubes must have sufficient strength, durability, and certain elasticity, and effective first keep reliable connection between rail and sleeper. Scaffolding tubes used in construction, to ensure the construction of the quality of the project is completed, in addition, also requires less scaffolding tube system parts, simple device, easy to assemble. Bowl connection is simple, the domestic commonly used scaffolding tubes cast iron production. Thus can adapt to all kinds of plane, elevation of buildings and structures with scaffolding.
2017-06-08 -
What Is the Function of Scaffolding Tube During Building of Scaffold
In the form of scaffolding tube frame according to the weld seam welded scaffolding tube and spiral welded scaffolding tube. Straight seam welded scaffolding tube production technology is simple, high production efficiency, low interest rates, rapid development. The strength of the spiral welded scaffolding tube is generally higher than straight seam welded scaffolding tube, use a narrow billet production of larger diameter welded scaffolding tube, you can also use the same
2017-06-08 -
Do You Know the Production Process for the Scaffolding Tube
Scaffolding tube maintenance skills 1. Observe the scaffold whole or partial vertical deviation, especially in observation scaffolding corners, breaking in two side port, whether the deflection, sinking. If found a strange person, shall immediately organize personnel for reinforcement. 2. Shop regularly check mat bamboo basketry, timely repair hamstring breaks, fill the hole. And at the same time check the colligation point of bamboo basketry.
2017-06-07 -
Frequent Encountered Temporary Problem in the Use of Scaffolding Tube
(1) to heavy scaffold should have a clear understanding, generally if the thickness of the floor more than 300 mm, should consider the design according to the heavy scaffolding, if scaffolding load more than 15 kn/was, should organize expert argumentation. To separate the parts of the steel tube length changes on bearing, for the upper free length should be considered a form scaffolding should not be too long, generally less than 500 mm advisable (in the new specifications may be revised), poling calculation generally on the top step
2017-06-07 -
Erection of Scaffolding Tube to Avoid Any Accidents in the Construction Projects
Bridging scaffold should strengthen support scaffolding tube base, and use stow-wood pad, each layer must be connected to the building firm. At the ends of the Angle steel truss should be assembled on the ground, truss must be stuck on both sides of the Angle steel support frame.With chain or lever hoist ascends to fine the insurance rope, should immediately after a hung up with the supporting frame. 22, with steel pipe erection of derrick, promulgation and adjacent joints staggered not less than 50 cm, tringle and bracing (cross brace) to be installed at the same time. Slippery course must be vertical, two rails spacing error must not exceed 10 mm.
2017-06-06 -
What Are the Roles of Scaffolding Tube in Each Scaffolding Products
According to the divided parts and supporting mode: Floor: 1) the erection (bearing) on the floor, roof, or other platform on top of the scaffold structure. 2) cantilever type: the way of cantilever fixed scaffolding, its to choose the way and have the following 3 kinds. Set up on the special cantilever beam; Set up on the special cantilever triangle truss;
2017-06-06 -
How to Identify the Scaffolding Tubes Which Are Poor Quality
Bad welding of spiral steel pipe identification method 1. Bad spiral steel tube folding is seen. Folding table is spiral steel tube surface form of all sorts of line, this kind of defect often throughout the entire product longitudinal. Causes of fold is due to the pursuit of high efficiency, the inferior reduction slants big, handle, when the next rolling produce folding, folding products will be crack after bending, strength of steel.
2017-06-05 -
The Need for the Scaffolding Tubes in the Construction Canopy is Decreasing
Scaffolding tubes have hot dip galvanized tube and two kinds of galvanized. Hot dip galvanized with coating uniformity, strong adhesion, good corrosion resistance, long life and other advantages, is widely used in industry in various fields. Corrosion resistance worse than hot dip galvanized, galvanized zinc layer and steel substrate layer, the zinc layer is thinner, attached to the steel substrate, easy to fall off. So in the customer when the choose and buy, we suggest the
2017-06-04