Live Chat
ADTO News
-
You Can Find Qualified Scaffolding Supplier of ADTO For Your Service
Cuplock scaffold equipment every other distance on the stud should be installed a Cuplock joint structure, and in the top plate shall be welded tube. Used as a scaffold vertical force and reliable support. The plunger is at the top of the pole, in its settings at the top of the vertical rod connecting pipe. Israel is advantageous for the kindergarten is inserted in the top structure. Used as a support material of hoisting frame stud. But has now cancelled the sale in domestic market
2016-11-27 -
Standard Mobile Scaffolding Manufacture Providing Qualified Scaffolding Products
Mobile scaffolding is introduced: the ratio of quality and application. According to the user and data reflect both at home and abroad, frame of door type, such as maintenance good, reusable above 30 times, bamboo and wood frame is can't match. Mobile scaffolding using weight per unit area was 50% lower than the rate for fastener type steel tube frame, every time down the
2016-11-27 -
Pay Attention to the Usage of Scaffolding Tubes in the Construction Project
1, regularly remove accumulated in the scaffolding tube pipe shelf dangerous parts of the materials, brick, concrete block and sundry; And on the shelves on the tube material should have certain limit, can't overload piled up. 2, along with the observe frame tube structure of the whole or local whether there is any deviation, especially the frame tube of each joint is to loosen deflection phenomenon, such as they should be should be timely maintenance.
2016-11-24 -
Basic Introduction of Scaffolding Tube Size in the Projects
Scaffolding tube pipe diameter of 48.3 mm, thickness: 2.0 mm, 2.5 mm, 2.75 mm, 3.0 mm, 3.25 mm, 3.5 mm, 3.75 mm, 4.0 mm. Length: standard length is 6 meters, the length can also according to customer needs processing. Need to pay additional handling fees. Material has Q195, Q235, Q345 several. National standard scaffolding tube pipe specification is 48.3 mm, wall thickness of 3.5 mm, joint length is 6 m.
2016-11-24 -
Introduction of Coupler Scaffolding Components Used in the Scaffolding System
Longitudinal tube should be set up, its length should not be less than 2 across, two longitudinal butt joint of docking fastener connection must be used. The fastener from the stem axis distance should not be more than one third of the span, and step in, both inside and outside two longitudinal bar of connectors should try to stagger across, up and down two adjacent longitudinal bar of connectors should also try to stagger a cross, as do
2016-11-23 -
High Quality Is the Goal Of Scaffolding Manufacturer to Provide Customers
Hard to cut down material, to split time, in order to avoid presents the phenomenon of missing parts. Operating rope bind components, the need of high operating under the pulley will delay the shipment, random dumping is prohibited. Again the material shipped by specialized personnel in the specified address, classified storage. Pay particular attention to Ringlock Scaffolding properly to keep of scaffold of some small parts.
2016-11-23 -
Three Ways to Deliver Strength Between Scaffolding Tubes
Scaffold for vertical pole and vertical shaft coupling, there are three kinds of force transmission mode: (1) socket docking handing down force. The poling docking, connecting rod or socket scaffolding tube pipe is used to ensure the docking in good condition; (2) the pin rod connecting pin rod shearing force; (3) the screw connection of meshing force. The external thread of inner tube and outer tube (set)
2016-11-22 -
Scaffolding Shall Be Equipped With Reliable Couplers On the Tubes
Degree of longitudinal bar and the vertical rod of each become friends point throughout right-angle fastener connection must be taken. Longitudinal bar extension of docking fastener must be taken through the connection, and from the interval of poling axis should not be greater than 1/3 of the span, the up and down or so between adjacent degree of longitudinal bar docking fastener shall be staggered a cross placed as much as possible.
2016-11-22 -
What Are the Major Advantages of Mobile Scaffolding And its Tube Fasteners
Mechanical processing production line, easy to realize mechanization and automation, convenient for management, and can reduce the transport, saving manpower, improve the efficiency of production, the surface hardened layer can be adjusted according to need, easy to control at present, many countries of the bearing system has developed into a distinctive mobile scaffolding accessories construction tools, take all kinds of series products. Mobile scaffolding accessories main advantages are:
2016-11-21 -
How To Maintain the Scaffolding Tubes After Application
In many cases the scaffold will happen in the case of not deformation, but also be signs of deformation, so we should prepare work before deformation. (1) scaffold local deformation caused by foundation settlement. On the double bent transverse section erection of eight kung, or bracing, every other row of poling erect a group, until the deformation zone. Scaffolding tube bracing must be located in a solid and reliable foundation.
2016-11-21 -
Tubular Scaffolding Foundation Shall Be Solid and Pressed
Tubular scaffolding should be paid attention to in the foundation level solid, and set up base plate, and have reliable drainage measures to prevent the water soak a foundation. According to the situation of rod set up the wall and load size, the commonly used open type double row scaffolding poling horizontal distance is 1.05 ~ 1.55 m, commonly building scaffolding interval is 1.20 ~ 1.35 m, commonly decoration or building, decoration and scaffolding generally
2016-11-20 -
Cautions for the Welding Process of Stainless Steel Tubes
Started in the rise of the bicycle manufacturing. Oil was developed at the beginning of the 19th century, ships, boilers, during world war ii aircraft manufacturing, chemical industry and the development of oil and gas drilling and transport and so on, have greatly promoted the steel pipe industry shift on variety, quality and yield. 1. The application of vertical external characteristic of power supply, dc when using normal polarity (wire cathode).
2016-11-20 -
What Is the Criteria to Accept and Check the Frame Scaffolding
Height under the 20 m and 20 m scaffolding, project organization, head of the technology by the unit security personnel inspect acceptance; Height is more than 20 m scaffold by engineering technology with the progress of the organizational unit in stages, head of the project director and relevant acceptance technology security personnel to check. 1, the acceptance of scaffold should possess the following documents:
2016-11-17 -
The Customization Of Frame Scaffolding in the Scaffolding Factory
Among many types of scaffolding, frame scaffolding, is one of the custom [manufacturers wholesale price], is now a lot of manufacturers, such as ADTO construction company can offer the public, tailored, this product is more conform to the needs of customers, can let the customer enjoy more personalized products, but in terms of price, also may be different, we also must to know more.
2016-11-17 -
What Is the Erection Height of Fast Erection Frame Scaffolding
Frame scaffolding is also called the multifunctional gate scaffolding, scaffold is widely used now in the market of mobile scaffold species, one of the Frame scaffold has many uses, besides can be used to build the scaffold, also can be used to establish the platform construction, also can be used as a template support, the main component is a door frame, door scaffolding rod, tie rod, pedal, connecting rods, etc. The basic unit of the Frame scaffolding door frame, cross handle,
2016-11-16