Live Chat
ADTO News
-
Why Is the Use of Ringlock Scaffoldign Easy For Construction Project？
Workers only need a hammer to install dismantling scaffolding, Ringlock scaffold disassembly faster than the installation Fastener scaffold fast 6-8 times, and the overall strength of strong more than 2 times the bowl Ringlock scaffolding, standardized components are easy to manage and transport. It can constitute a large scale, high, large span, cantilever, every, double bent framework, mobile rack, and other structures. Widely used in all kinds of engineering construction, Marine aircraft maintenance, system installation stage stand, etc.
2016-10-11 -
How to Define the Usage of Ringlock Scaffolidng With Its Couplers
Ringlock scaffold in the United States and Europe has been widely used in nearly a decade, the penetration rate is very high. Slowly also introduced China's Hong Kong, Macao and Taiwan began to a lot of use, and the bowl frame, dish buckle scaffold safety coefficient is higher than that of bowl frame, plate Fastener scaffold has received attention in the construction project, the following simple introduction for everyone footwall Ringlock scaffolding main component and USES. (a) stud
2016-10-11 -
Higher Efficiency and Safety Ratio of Scaffolding Product
Round buckle scaffold is a new type of scaffolding, through the four directions of leverage as a support to provide more stable performance than usual. In general triangle is highest stability, and the wheel ringlock scaffolding from which point of view to be able to show a three-dimensional leverage as a support. Such stability must be greater than the average of
2016-10-10 -
Analysis of Price and Quality of Ringlock Scaffolding From Suppliers
Due to the function of the wheel ringlock scaffolding brought great convenience to people, so it's useful degree is increasing, as a result, people have a greater demand for it, it is also a round ringlock scaffolding war one of the reasons that led the market constantly. At the same time, we need to know is that any products must have their own unique place, only
2016-10-10 -
The Cuplock Scaffolding Factories Aiming At Real Development
In demolition of cuplock scaffold shelf, to divide the relevant section of the first, around the perimeter of the area, and set up on the fence or erect warning marks, on the work site, to set up the unit will command, in addition, to prohibit the construction personnel entering working areas. For the user details cuplock scaffold disassembly process in detail, when removing the need to pay attention to, avoid accidents.
2016-10-09 -
Ringlock Scaffolding Industries Developing Along With the Trend
Because the building is in the plane of the fan, the curve radius is small, so the need for curve of scaffolding. Through calculation, the outer arc scaffold with three internode as a group, inner arc scaffolding is a set with 4-5 internode, and consists of a number line. Poling of the longitudinal spacing between 1.2 1.5 meters, the horizontal spacing of 1.2 meters, the spacing of the medial
2016-10-09 -
Scaffolding Coupler Right Way to Fix It Into Scaffolding System
Scaffolding coupler heat treatment process was strictly carry out the stages of temperature and time. Machining process, in strict accordance with Scaffolding couplers and strict to test plastic Scaffolding couplers and steel bonding surface, in order to make sure the Scaffolding couplers sliding resistance, tensile performance requirements. Scaffolding couplers (except base) must pass a 70 n. m torque testing, inspection, not allowed to damage.
2016-10-08 -
Pay Attention to Such Problems When Building Scaffolding System
Scaffolding security problems when use widely attention, how to prevent the scaffold safety, what issues in the process of scaffolding remove need to pay attention to? After the scaffolding, should be qualified by the security department and hang set & other; set up qualified & throughout; rear can put into use. don't dismantle the basic structure of bar and even the wall, when the need because of the job must be pulled down some bar and even the wall
2016-10-08 -
What If You Need Check How to Build the Scaffolding Tubes In A Right Way
Stud set must be equidistant to straight, the longitudinal spacing shall not be more than 1.8 m. Poling horizontal spacing of 1.0 m, poling from metope to 40 cm. Putlog vertical spacing interval) (that is, the scaffold is 1.8 m, the underlying interval shall not be greater than 2 m, small bar pick out the inside and the length of the stud shall not be less than 30 cm and 15 cm respectively. Scaffold outside every 9 m must establish a bracing, and the Angle of the ground should be controlled in 45 ° to 60 ° between top-down set in a row.
2016-10-07 -
How to Build the Scaffolding Tubes into the Whole Scaffolding System
1. The erection of scaffolding must be added a base or foundation, and the foundation of treatment. This project poling brace on the foundation slab directly or old soil, foundation pit bottom add tie bearing. Old soil surface laid foundation pit bottom plate must be smooth and shall not be suspended, placed the base should be pull and pull rod, spacing dimension by the regulation to be fixed after placement.
2016-10-07 -
Suggestions From Scaffolding Suppliers About How to Build the Scaffolding
Cuplock scaffolding dismantling points, the frame body dismantling shall be fully inspection before scaffolding connection, supporting system, such as whether conform to the requirements of the structure, according to the technology management program approval to implement demolition job. Scaffolding demolished before, on-site engineering and technical personnel for on-the-job operators targeted safety technical disclosure. Dismantled scaffolds shall be designated safety, set up warning signs, send modes. Demolition workers, a place, must hold
2016-09-29 -
Info About The Ringlock Scaffolding Couplers and Accessories
Ringlock scaffolding accessories loading and unloading speed is quick. Than the average fastener scaffold of handling several times faster, Ringlock scaffold fittings splice ability is better than that of the other scaffolding, because it is completely avoid the trouble in bolt in the process of use, one of the workers operating only need a simple little hammer can easily get a task, then it was
2016-09-29 -
How Much Material Will Be Needed to Build One Meter Scaffolding
The scaffolding after to buy or lease, are often scattered, need according to the needs of their own, specific to build. The scaffold erection of square meters how much material? This is a lot of people are asking a question, and the materials they need to the erection of scaffolding, including rail, and poling, there are some other pieces of small objects, etc., be sure to calculate good,
2016-09-28 -
The Right Ways to Diversify Different Kinds of Scaffolding
1, whether mobile: divided into mobile and fixed two; 2, material: wood, steel and ladder; 3, tower form and the using purpose: (1) - used to support the template form scaffolding, scaffold materials, authors of shelf (2) single scaffold - referred to as "single frame, or only a row of vertical rod, one end of the transverse horizontal bar on a scaffold on the wall (3) double row scaffolding - referred to as "double bent, by inside and outside the two rows of
2016-09-28 -
The Most Inclusive Coupler Type Steel Pipe Scaffold Designs
Should not only meet the requirements, should not exceed allowable bar bear ability, and not more than design allows load (270 kg / ㎡), scaffolding overall structure block unloading measures should be taken. The foundation Scaffolding foundation and foundation construction, must according to the height of the scaffold erection, erection of site soil conditions for processing. Scaffolding base level should be higher than the natural ground level ground 50 mm scaffolding
2016-09-27