ADTO News

• 

  Scaffolding Quality Has the Most Powerful Ability to Attract Customers

  Cuplock scaffold and mobile scaffolding are construction scaffolding most common three types. Is to tear down the rail, scaffolding, brace, shears brace then to remove the device small bar, big bar and rod and other components, at the same time also should be performed in accordance with the principle of step disassembly, strictly prohibited or operation. At the same time. It is a

  2016-10-23
• 

  What TypesCan the Scaffolding Be Divided Into According to Its Functions

  Ringlock scaffolding is a common construction tools, are common in our daily life, such as the construction site, building construction, market upgrade, the outside of the large construction and so on, usually need to use to the scaffold. But Ringlock scaffolding in accordance with the purposes are divided into which a few kinds? The first is to know to its main functions in the first

  2016-10-20
• 

  What Makes ADTO Ringlock Scaffolding So Popular in the Market

  New ringolck scaffold application in domestic projects have not be able to fully implementing, but have become prevalent in the situation in abroad, many domestic construction friend has not come into contact with this new type of scaffolding products, also is not very understanding of its function characteristics, therefore, most still choose traditional scaffolding. ADTO group is a new type of ringolck scaffold in domestic professional manufacturers, both in product production process and set-up technology, are very experienced, ADTO group below

  2016-10-20
• 

  General Control Points of Floor Scaffolding Building Project

  A, floor ringlock scaffolding for ground control points: 1, appearance: vertical rod and bar for yellow, protective railings and bracing for the red and white alternate with, each length is 500 mm. (1), scaffolding, groundwork and foundation should be according to the load, the erection height, site soil condition load calculation, determine the use wood fang, the springboard or channel steel plate. The frame body is greater than 24 m is less than 50 meters must be set when the

  2016-10-19
• 

  General Control Points of the Rinlock Scaffolding Building Project

  Ringlock scaffolding of general control points: 1, in order to prevent the collapse of an outer layer, ensure the security of construction, all outside the frame before the construction, must after the company and the detailed project planning, compiled by the project technical department special plan, submitted to the technical project director audit, project manager for examination and approval and then submitted to the company's technical department check, examination and approval of the company's chief engineer, to pay the total supervision engineer after examination

  2016-10-19
• 

  Requirements on the Ringlock Scaffolding Design and Erection

  Rinlgock Scaffolding is used in project construction site safety protection products, the index of scaffold has a higher request to the security of it, using it to design and manufacture of deviation index must be within the scope of control in the following, what should pay attention to safety problems in the process of the scaffold erection, scaffolding, process which allowed deviation requirements. ADTO building below makes up and shares it with.

  2016-10-18
• 

  Revolution Makes the Competence of Ringlock Scaffolding Stronger

  With the development of China economic construction, things are changing, the old and new steel pedals are alternately, China ringlock scaffolding board manufacturer only innovative manufacturing processes can not be eliminated, scaffolding 240 * 3000 enterprises in the continuous innovation and development, is an important equipment of the real estate sector. There are various kinds of scaffold board of 240 * 3000 steel scaffolding 240 * 3000 more advantages compared with other materials and safety performance.

  2016-10-18
• 

  ADTO Requirements On the Galvanized Ringlock Scaffolding tubes

  Galvanized ringlock scaffolding pipe in the construction of shelf use proportion is large, it is by its innovation on early the anti-rust treatment process, greatly improve scaffolding steel pipe use fixed number of year. Rack pipe is used for the erection of construction operation platform, and will use bar, a long time of bearing and wear will bring its indelible damage, therefore, by use of the national standard pipe shelf on mechanics and antirust processing has certain requirements.

  2016-10-17
• 

  Much More Discount for Much Better Quality From ADTO Ringlock Scaffolding

  At present, the development of the construction industry in our country is getting better and better, at the same time, the project material are all in good development, to the scaffold used in the construction industry, for example, now every big project has been to get rid of the traditional cumbersome scaffold. Now used in the construction industry is more of ringlock scaffold, how much is the ringlock scaffold may slightly higher, but it has broke the traditional scaffold installation steps of trouble, use rise very convenient.

  2016-10-17
• 

  The Building Erection of Ringlock Scaffolding On the Stage

  1, the position of the first roughly on the ground, set the four base, adjust well below the leg, in a horizontal plane; 2, base on the four corners of the outside of the insert at the bottom of the inclined support section, each Angle 2 root, a total of eight root; 3, put the head screwed on the base, pay attention to the direction of rotation to the head is the same as noted in figure; 4, set a good party set in the head;

  2016-10-16
• 

  Ringlock Scaffolding Used on the Stage and Its Features

  Ringlock scaffold is a frequently used type of scaffolding at the construction site. In ringlock scaffold, it has stronger stability, compared with the traditional use of ringlocks, ringlock scaffold using more convenient and quick, and in the actual application, can according to their own needs to adjust height and length. Ringlock scaffold by ringlock legs, step plate, roof, fold the leaves, the open brace, ringlock foot end set, etc, and also should meet the following requirements: (1) the

  2016-10-16
• 

  Tips For the Use of Aluminum Scaffolding on the Construction Site

  And the rapid development of modern science and technology, new technology, new material, new technology cluster, with each passing day. In this situation, the new material with high strength, high strength aluminum alloy materials are widely used. Take the aluminum alloy scaffolding, for example, aluminum alloy scaffolding is an example of successful application. What do you know about it? Aluminum alloy scaffolding is widely applied to the construction process of

  2016-10-13
• 

  Supplier for the Ringlock Scaffolding Winning Sound Reputations

  At present, China's ministry of no wheel ringlock scaffolding industry standards and norms, but has begun to widely used in the construction site, certainly hope relevant departments to formulate the corresponding specification, make the wheel ringlock scaffolding used correctly in the project have reliable basis. Round ringlock scaffold not only advantages, it still has many shortcomings .No one is perfect, content without the content. It should not be positioned at the grassroots level as is not hard, the

  2016-10-13
• 

  What You Need Pay Attention to When You Remove Scaffolding

  After the construction completion, through engineering, head of the check and confirm that no longer need to use the scaffold can be dismantled. Dismantle scaffold to make plan first, then after engineering director for approval can be removed. What attention scaffolding demolition should pay to? The dismantled scaffold must meet the following requirements when a before, dismantle scaffold, must first remove the scaffold material above, construction tools and all kinds of stuff. Second,

  2016-10-12
• 

  ADTO Scaffolding Provided With Lower Price and Higher Quality

  After the test results meet the design requirements, with the development of foundry industry, for steel bar stress and tension is have to continue to deliver and steel tube. It to realize the unity between the stud and the plunger, 5, and Q235 welded steel pipe.(3) the bar lap and fixed part is rigid structure, poling verticality deviation whether meet the design, such as versatility, avoids the bolt operation bring inconvenience, the use of safe and reliable.

  2016-10-12