Ringlock scaffolding is generally referred to as the of all kinds of socket scaffold. Abroad in the early 1980 s in Europe and the United States has vigorously promoted and use the new security good scaffolding.

Ringlock scaffold construction
With the development of construction industry, scaffolding industry innovation, ringlock scaffold species are also more and more.
1, the classification from the socket, ringlock scaffold to classification have a circular plug from the socket, square socket, plum flower form socket, v-shaped, u-shaped socket, etc.
2, from jack to classification, jack has four, and eight.
3, from the bolt in the form of more diverse.
The disc scaffold 05
Currently applied in the construction of most ringlock scaffold with the scaffold, disc type scaffolding, etc.

1 ringlock scaffold must cooperate with the progress of the building, a building height should not exceed more than even the wall adjacent two steps. When ringlock scaffold engineering operational level higher than even the wall of a second step, the temporary stability measures should be taken, until finish on a layer of the wall of a building is demolished according to the situation;

2 layer, ramps railings and block the construction of the baseboard shall meet the following requirements (figure 7.3.11);
(1) the rail and foot shall be set up outside the poling inside;
(2) on the railing of epithelial height should be 1.2 m;
(3) block foot height should not be less than 180 mm;
(4) railing should be centered in the set.
The top three stud should be 1 m above the parapet epithelium, eaves above 1.5 m epithelium.