Live Chat
ADTO News
-
How to Prevent the Ringlock Scaffolding From Rusting?
It is well known that iron and steel products tend to rust in the air, especially in humid air, which will greatly reduce the service life of iron and steel products. Mobile scaffolding, as an important auxiliary tool in the construction process, is also prone to rust, and its rust often causes great disasters. Then how to prevent the ring lock scaffolding from rusting?
2018-09-05 -
Emergency Measures for Ringlock Scaffolding’s Deformation
Ringlock scaffolding will deform locally as a result of the sub-grade settlement. It is dangerous. As the ringlock scaffolding are interconnected and an integral whole. Locally deformation is likely to cause the collapse of the whole scaffolding system. At this point, we generally take the following measures.
2018-09-05 -
How to Prevent the Scaffolding Accidents?
It is difficult for us to avoid accidents in production and work, and also, it is impossible to completely eliminate the possibilities of all these accidents. But with the rise of people’s safety awareness, the accidents rates can be greatly reduced. During the construction of scaffolds, are there any preventive measures can help us to prevent accidents? Below shows us the answer.
2018-09-05 -
What's the Reason Causing the Scaffolding Accidents?
As we all know, the installation of ringlock scaffolding is for the safety of construction personnel. Without the stable and high-quality scaffolding, the construction personnel will have no safety guarantee. What's reason causing the scaffolding accident? Below are the answers.
2018-09-04 -
How is Tubular Scaffolding’s Future?
In many construction sites, tubular scaffolding is used with good effects. Due to the tubular scaffolding system can be adjusted according to different conditions, it is popular among the construction personnel and has a good reputation.
2018-09-04 -
An Introduction of Kwikstage Scaffolding
Kwikstage scaffolding is a kind of quick fit scaffolding, which can be quick and easy erected in construction and form works system. Kwikstage scaffolding is popular in Australian and UK, Ireland countries. Kwikstage scaffolding system is widely used today.
2018-09-03 -
The Comparison of Cantilever Scaffolding and Climbing Scaffolding
Scaffolding is an essential tool for construction. Different construction schemes are adopted to ensure the safety of construction according to different working conditions. What's the difference between Cantilever Scaffolding and Climbing Scaffolding? Below is the comparison between these two kinds of scaffolding.
2018-09-03 -
Comparison between the Ringlock Scaffolding and the Cuplock Scaffolding
The differences between Ringlock Scaffolding and Cuplock Scaffolding can be compared as follows:
2018-08-31 -
Conventional Methods to Reducing the Scaffolding Accessories’ Losses
Some suggestions to avoid scaffolding accessories' losses
2018-08-30 -
Why Do We Use Cuplock Scaffolding?
Several reasons to use cuplock scaffolding
2018-08-30 -
Why Do More and More Construction Parties Choose to Use Ringlock Scaffolding?
Ringlock Scaffolding is well known for its economy, convenience, and safety in the construction industry. Both construction installers and investment managers prefer to use Ringlock Scaffolding due to it has the following advantages
2018-08-29 -
Why Is the Maintenance Work of the Ringlock Scaffolding Accessories Is Very Important
Ringlock scaffolding used in different areas of different role in the building is different, different the use of ringlock scaffolding on the building, after a sharp, will also install remove loop repeatedly, ringlock scaffolding accessories inevitably have a lot of consumption, in use process will be as the use scope of different consumption big consumption, thus to increase the maintenance work. A, ringlock scaffolding accessories if they can play a better role when use, we need to pay attention to the quality of the products when the choice question, in use process and also need
2018-07-26 -
What Are the Standards and Regulation of Ringlock Scaffolding in the Projects
Construction ringlock scaffolding set-up brings to the construction personnel of the safety of everyone is visible, the scaffolding for all construction personnel to greater security, so be sure to check and accept, so how about scaffolding acceptance standard specifications? With the manufacturer to look at the following introduction: 1, scaffolding, construction director shall, in accordance with requirements of the construction schemes, in combination with the construction site operation conditions and team, do detailed disclosure, and specialist command. 2, the height of the erection of the shape to conform to the requirements; Shelves to strong stability, deformation; Set-up should be horizontal flat vertical pole, lap is strong; High homework scaffolding shall be installed lightning protection facilities; Steel stud, main rail joint should be staggered, lap length > 50 cm; Steel pipe scaffold made rod should be vertical stability on metal base or mat wood, in case of digging, should be tied to sweep the floor.
2018-07-25 -
Why the Adding Erection Height of High Rise Building Should Be Less Than 4 Stories
High-rise building scaffolding generally belongs to the steel scaffolding tube cantilever scaffold, is on the edge of the floor at cantilever beams, then the scaffolding set-up of rod stood in beams above way. Formworks are generally four turnover high-rise construction. A layer of set-up, do the actual strength requirement by 70% to 70%.5 to 7 * 3 = 15 to 21 days. High load is big, insecurity, waste. Scaffold erection of four layer in addition to the cause of the material flow, there are technical reasons. The height of 3 m or so of general residential high-rise office building storey height is around 4 m, and the People's Republic of China ministry of housing and urban-rural development, no. 87 in this paper, more than 20 m steel cantilever scaffold belong to more than a certain size of greater danger division component project.
2018-07-20 -
Tubular Scaffolding with Couplers Plays Great Roles in the Construction Projects
There are three kinds of coupler products: right-angle coupler, docking coupler, rotating coupler. Packed in woven bag, 3 bkyniqo2ner1 each bag is 25.The weight of each should be 1.1 KG (including bolt and nut).In general is to use the form of a dip in the red anti-rust paint do antirust processing. And frame tube. General production and the ratio of purchasing is 8:1:1 coupler products. Say is right Angle in proportion accounted for 80%, 10%, docking rotating 10%.Coupler type steel scaffolding tube is composed of steel tube pipe and coupler, with the features of easy processing, handling bento, versatility, such as characteristics, has become a time using the biggest and the most widely used in our country a scaffolding, scaffolding using total accounted for about 70%.
2018-07-19