Live Chat
ADTO News
-
Hot Rolled Steel: How it is Made
The process in which hot rolled is produced begins with heating slabs of steel to approximately 2,300 degrees Fahrenheit. The amount of heat directly affects the properties of the steel. Meaning, if the temperature is not high enough it can cause defects in the material. This is likely due to carbides (compound of carbon) and nitrates not fully dissolving. When the hot material is being transferred from the furnace it reacts with the oxygen in the air. This reaction forms a mill scale or a flaky surface of iron oxides. The mill scale can affect the surface quality of the hot rolled steel if left alone. To remove the iron oxides the material is then sent through a mill scale cleanse. It is sprayed with high-pressure water (much higher than your power washer at home).
2019-07-17 -
Defects that Easy to Occur on Galvalume Steel Coil
Due to the process characteristics of the galvalume steel coil, it is prone to occur some defects. In addition to the surface, the coating is loose, the galvalume steel coil is also prone to occur the following defects:
2019-07-15 -
Hot or Cold? Which Kind of Rolled Steel Should We Choose?
When approaching the start of our construction project, it is crucial to know the type of steel that is best suited for our needs. Different types of steel manufacturing can produce material that performs better for specific applications. The hot and cold rolled steel manufacturing methods specifically have a great effect on the overall performance of the steel.
2019-07-15 -
Steel Coil Definition And Classification
Steel coil, a finished steel product such as sheet or strip which has been wound or coiled after rolling. In the light of experience gained during these years, ANSON classifies steel coils into hot and cold- rolled types, or stainless steel coil, carbon coil, and Galvanized Steel according to current products and international standards.
2019-07-12 -
Do You Know Properties of Mild And Low Carbon Steel?
Mild steel is the least expensive of all steel and the most common steel used. Used in nearly every type of product created from steel, mild steel is weldable, very hard and, although it easily rusts, very durable. Containing less than 2 percent carbon, mild steel is able to be magnetized and used in almost any project that requires a vast amount of metal. The structural strength of mild steel prevents it from being used to create load-bearing girders and structural beams.
2019-07-12 -
Do You Know Properties of High Carbon Steel?
High carbon steel is one of the most important construction metals in the world. While this is common knowledge, many people do not understand the difference between high carbon steel and other types of steel. Like any other specific type of steel, the high carbon version of this medal not only has specific properties unique to itself but also boasts both unique advantages and disadvantages when compared to other types of steel.
2019-07-12 -
Do You know What Is Carbon Steel?
Steel is considered to be carbon steel when no minimum content is specified or required for chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium or zirconium, or any other element to be added to obtain a desired alloying effect; when the specified minimum for copper does not exceed 0.40 percent; or when the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60, copper 0.60.
2019-07-11 -
Why use ADTO Office Phone Booths?
ADTO Office Phone Booths are private soundproof pods designed for increasingly open work environments and a world that is on the go. Our modern phone booths improve the productivity of open-concept offices, allowing workers to take private phone or online calls without occupying conference rooms or having to wander far from their work station. Offered in a wide range of finishes, ADTO Office Phone Booths are high quality, fully customizable furniture fit for any open interior space.
2019-07-10 -
4 Major Hazards Influenced Scaffold Safety
There are four major hazards associated with worker injuries that everyone needs to be aware of proper scaffold safety.
2019-07-09 -
Scaffold Safety: How to Reduce Scaffolding Accidents?
According to the statistic, 72% of workers injured in scaffold accidents attributed the accident either to the planking or support giving way, or to the employee slipping or being struck by a falling object. Scaffolds are integral to the construction industry with approximately 65% of the workforce involved in work from scaffolds. When used properly, scaffolds can save significant time and money.
2019-07-09 -
What Causes Scaffolding Collapses at Construction Sites?
Scaffolding is an integral part of many construction sites, elevating workers and materials during construction, maintenance, or repair projects. Unfortunately, when these structures fail, workers can sustain extremely serious injuries, including some that can result in permanent disabilities and long-term medical complications.
2019-07-08 -
How Can We Prevent Scaffolding Collapse Happening?
scaffolding tends to offer a comfortable and safe working arrangement as compared to working from ladders, leaning over edges and stretching overhead. While on the other hand working at height itself is a big danger and working on scaffold enhances the risk to it especially when safety regulations are ignored. Scaffolding accidents mainly involve people falling, incorrect operating procedures, environmental conditions and falling materials due to equipment failure.
2019-07-05 -
What Causes Scaffolding Collapse?
Scaffolding accidents mainly involve people falling, incorrect operating procedures, environmental conditions and falling materials due to equipment failure. The causes of scaffolding collapse include failures at attachment points, a parts failure, inadequate fall protection, improper construction or work rules, and changing environmental conditions (high winds, temperature extremes or the presence of toxic gases).
2019-07-05 -
ADTO GROUP! Professional Kwikstage Scaffolding Manufacturer In China
ADTO GROUP, as the kwikstage scaffolding suppliers & manufactures, can supply all kinds of falsework structures, is an enterprise with 14 years’ foreign trade experience based in China. Kwikstage scaffolding is a star product on ADTOMALL (one-stop purchasing website for engineering materials).
2019-07-03 -
Do You Know the Other Name of Kwikstage Scaffolding?
Kwikstage also called Quick stage, it mainly used in Australia, UK, South Africa, Southeast Asia (there will be some difference between these areas, but the technology is the same ), is a modular scaffolding system.
2019-07-03