Socket type ringlock scaffolding, specification
1. Important scaffold must formulate the construction plan, when it is necessary to develop safety guarantee measures.
2. The height more than 25 m scaffold fastener type steel pipe scaffold must be adopted, the  stem scaffold height should be controlled within 50 m; The scaffold height more than 50 m should use  poling, effective measures, such as suspension wire rope, unloading and designed separately.

3. The scaffolding design must meet the needs of engineering, and indicates its purpose, and the maximum static load and dynamic load
The level of stress, etc.; The selected design parameters and components, shall not be lower than the current national technical specification and related safety standards.

4. Need to change the original structure, the scaffold in construction of heightening (wide), instead it USES, such as cases, must be approved by technical department, and the examination and approval.

Socket type ringlock scaffolding construction method is to stand erect vertical to the ground, and then remove the bar is perpendicular to the vertical bar to the ringlock, the ringlock in the rail joint, with a hole corresponding to the ringlock and then bolt erect and press, make the bolt insert ringlock holes and the rail joint, the use of the bolt, to make it perfect. The whole plate buckles type steel pipe scaffold system can be installed in this way.

Step1: put the adjustable base. Venues such as uneven, with adjustable base adjustment.

Step 2: build the foundation frame body. According to the requirements of graphic, authors first layer of poling, level pole
Step 3: erection of steel vertical diagonal, laying platform planks
Step 4: erection of ladder beam, laying
Step 5: according to the using demand is high, the safety acceptance specification after use.