A, ringlock scaffolding erection sequence and steps

1, in accordance with the site and layout size, put the adjustable base, and the adjustable base nut to roughly the same level;

2, install the vertical pole erected on the adjustable base, and in the same way the installation adjacent to a vertical rod;

3, will correspond to the span length of rail hooking in installed good promulgation and between ringlock.

4, installation adjacent stud, at the same time, to bar hooking;

5, continue to install poling, bar hooking form four after poling a unit body;

6, use level or level, rotate the adjustable base, to build a good base for level adjustment;

7, will base level after the adjustment, the pursuit of root with corresponding diagonal;

Second, the ringlock type scaffold erection technology


1, no matter what type of erection of scaffolding, scaffold material and used in the processing quality, must conform to specified requirements is absolutely forbidden to use unqualified erection of scaffold materials, in case of accident.


2, general scaffolding must be scaffolding set-up, security technology operating rules for height more than 15 m or more tall scaffolding, must have the design, calculation and detailed, the erection scheme, technical director at the next higher level for examination and approval, have a written safety technical clarification, before the erection.


3, risk for large and special crane, pick, hang, socket, stacking shelves must also pass design and the examination and approval. Prepare a separate safety technical measures, to the erection.

According to the following requirements:

1, the ringlock type scaffold processing, the basis of practice and embedment depth must be accurate and reliable.