Calculation rules to master a lot of ways, according to the construction area and so on, these provisions, uniform calculation rules require building frame scaffolding before the surrounding range is calculated, probably how many shelves, and probably more high shelves, and how to take a right. This is all set up before preparation. To talk about the following door scaffolding calculation rules.

Single buildings eaves height within 6 m is calculated on a layer of a building area of composite scaffold, building eaves in 6 ~ 20 m is high, not more than 1 m to calculate an increase, if add layer height less than or equal to 0.6 m, yea, more than 0.6 m, calculated on a layer increases.
 
Not according to the construction area of calculation of the composite scaffold independent column, reinforced concrete wall and impending single beam, continuous beam single scaffold:

1. Independent of brick, stone, reinforced concrete column, the column structure of peripheral ADTO multiplied by the area of the column high; Using single row height in the following, scaffolding quota to deduct safety net; Above, to paraphrase the corresponding height of double-row scaffold quota.

2. The cast-in-place reinforced concrete wall, according to the wall structure length times height with area computation, to paraphrase the corresponding height of double-row scaffold quota to deduct safety net.

3. The cast-in-place reinforced concrete beam or continuous beam, the outdoor floor surface is designed according to the length of the beam structure is multiplied (or floor surface) to the height of beam end face with area computation, to paraphrase the corresponding deduct the net height of double-row scaffold project, that is associated with the frame scaffolding column is no longer calculate scaffolding.