Frame scaffold in the construction of the transfer process, the key problem of the load is to determine the size of the effect on the frame scaffold construction load value and the influence of wind load values of steel tube scaffold, etc.

China's state council in 1956 promulgated three regulations specified in the frame scaffold construction load shall not exceed 2700 n/m2, wind load values has not made clear unified regulation. (1) the job site should be set up security fences and warning signs, prohibit irrelevant personnel enter the danger zone.
Or lost has not been formed (2) the structure stability of the frame scaffold parts should be added a temporary support or Rachel.
(3) the use of seat belts, on the buckle to hang the no content, should set up safety rope.
(4) when the demolition of frame scaffold, to set the amount or the facilities, casting is prohibited.

1. Dismantle frame scaffolding preparation work: comprehensive inspection frame system scaffolding, focusing on fastener connection fixed, such as supporting system meets the safety requirements; According to test results and preparation of demolition scheme and the site condition and approved by the department; Technical clarification; According to the demolition of the scene of the situation, fences or warning signs, and have people watch; Retained in the removal of scaffolding materials, wires and other sundry.
2. The demolition of frame work areas, prohibit the operation personnel to enter.

3. Before open frame, shall have the site construction manager's approval formalities, specialist command is required when open shelves, do echo, up and down movement coordination.
4. After dismantling order should be raised parts, first raised parts before, it is forbidden to use pushed or pulled down the demolition.