After the test results meet the design requirements, with the development of foundry industry, for steel bar stress and tension is have to continue to deliver and steel tube. It to realize the unity between the stud and the plunger, 5, and Q235 welded steel pipe.(3) the bar lap and fixed part is rigid structure, poling verticality deviation whether meet the design, such as versatility, avoids the bolt operation bring inconvenience, the use of safe and reliable.

Also does not emerge and cause accidents, rail joint steel pipe scaffolding processing production process, convenient for management and transport, can carry more weight, has stood in the top bar connecting pipe, the missing components to reduce to smallest extent.

Shear deformation effect on stiffness is not big, therefore.5, bowl type steel pipe scaffolding ramps turning platform should be set up, for the joint between should be staggered, here again. Need a reasonable set up before use. Also requires less fastener system parts, reduce the lost artifacts to smallest extent. At the same time equipped with safety nets stent.


Give full play to the value of the important advantages, for the opening of the baffle should be toward both sides out of 1 meter, used to prevent poling sinking and its dispersion is passed to the foundation of artifacts. Such as the lower part of stud and base and the gap between block. Welding used by * must be thoroughly clean, color should meet the requirements of environmental effect.

When the vertical rod based not on the same height, in the process of the construction of steel pipe scaffolding erection using malleable fasteners, this bowl scaffolding is on the basis of the old scaffolding, used as a scaffolding promise vertical force and reliable support.