The standard door scaffolding is made by two pieces of the frame body, two diagonal member, four connecting rods, a hook of springboard. Gantry frame scaffolding usage basically as interior decoration or simple exterior wall construction, optional universal wheel, moving quickly used to decorate and support body. Frame scaffolding has the development experience for a long time.

Frame Scaffolds - Access Ladder Frame Walk-Through OK for Climbing Must have External Access 

Frame Scaffolds – Access Erectors can climb either type, but provisions for safe access should be established as soon as possible. Bottom rung cannot be more than two feet high.  Options for access are manufactured bolt-on ladder system, stair system, or extension ladder secured and sloped properly. X-braces are not intended for use as access. 

Frame Scaffolds Systems should use only original parts. Components from different systems should not be mixed. All frame scaffolds must use a manufactured base pad. Vertical tubes should never sit directly on the ground or make- shift mud sill. X-braces may serve as a top- rail or mid-rail, but not both. If aluminum walking decks are used, be sure that end hooks are in place and that the dimensions match the scaffold. 

Decks And Planking All platforms must be fully decked or planked. Each abutted end of a plank shall rest on a separate support surface. Overlap platforms not less than 12” only over supports, unless restrained to prevent movement, i.e. ”Cleating”. The working deck should never be more than 14” away from the working surface. 

Decks And Planking A scaffold grade plank will be stamped or marked as such Plank must be laminated or solid drawn A lumber yard 2 x 10 can be used if it is free of knots or other defects Rough Sawn, Full Dimension Lumber Nominal Thickness Lumber Working Load in lbs/ft² Permissible Span in Feet.