There is a steel tubular scaffolding type named the single typed tubular scaffolding, which uses only one type of scaffolding tubes of

Ф48×3.5mm. Different kinds of scaffolding shall be used in the same different type of construction projects and formwork projects. The

cuplock scaffolding are most widely used in the bridging construction projects. So does the frame scaffoldings. When constructing the

main body of the buildings, the coupler scaffoldings are more often used. The transverse space between the standing tubes is usually

0.9-1.5m and the longitudinal space is 1.2-1.8m. For sure, there are also other scaffolding kinds. ADTO scaffolding products fully comply

with Euro HD1004 standards and also the most up to date international standard. ISO 9002 are also certified in our company.

When choosing the scaffolding, the predominant factor is the diameter element. This is delicately designed to meet special construction

requirement in the construction projects.

ADTO scaffolding products can give you such experience as follows:

Large range of the load bearing capacity.

Half rigidity of the connection coupler joints with wide range of joint capacities.

Small tolerance of the deviation ratio when the whole scaffolding is working under pressure.