Frame scaffolding is the key to the entire device, therefore in the build-up to observe the erection to better complete the engineering tasks. Below the frame scaffold manufacturers to introduce the scaffold in the points for attention during the erection of the frame frame and accessories:

1, cross support, horizontal plane, scaffolding, connecting rods, arm lock settings should comply with the regulations of structure. Cross support, horizontal plane and scaffolding should follow the installation of the frame set in a timely manner.

2, two different products, frame and accessories shall not be mixed in the same scaffold. Various parts of lock, toggle hook must be in a locked state. Level or scaffold board should be set in same step, scaffolding should be spread.

3, the position of the steel ladder should accord with the requirement of assembly plan, the underlying steel ladder should be set at the bottom of the steel pipe with fastener fasten on the frame of erect stem, both sides of the steel ladder across all should set up handrail. Each ladder can step across two or three steps frame again turn.

4,Frame scaffolding does not need special maintenance, maintenance. The frame scaffolding components to eliminate the bolt connection, artifacts by touch upon, the whole surface of galvanized processing, anticorrosion, artifacts the beauty is generous. Frame scaffolding wide range of use, can be used for construction of the following situations.

1, used for buildings, halls, Bridges, overpass, tunnel and other template supporting roof or fly die within the frame. Can be a temporary site dormitory, the warehouse or barrack.
2, the use of mobile scaffold accessories with simple roof truss.
3, used for erection of temporary balcony and stand.