In today's engineering construction projects, in order to guarantee the safety of construction personnel and provide the convenience of high-altitude operation, as well as the horizontal or vertical construction of various materials in the construction project, we recommend using ADTOMALL’S ACROW STEEL PROPS to give them support.

In the daily construction observation, we find that the maintenance of ACROW STEEL PROPS is still to be perfected. The maintenance of ACROW STEEL PROPS is the most important part of the construction project. With poor maintenance, it will not only bring danger to the construction workers but also cause irreparable loss of the project materials. How can we do a good job in acrow props’ maintenance? Below we will have a discussion.

First of all, the vertical deviation of the whole or part of the acrow props should be observed. The two side ports at the break point of the opening and the four angles of the acrow prop should be specially observed to decide whether the acrow prop is working with deflection and subsidence. If any abnormality is found, personnel should be immediately organized for reinforcement.

Always check the bamboo basketry, and repair the broken ribs and strips in time to fill the holes. The fastening points of the bamboo basketry should also be checked at the same time.

The fastening of the connecting wall rod should be strengthened and the displacement of it should also be restored to the normal position in time. For the position affecting the construction, it shall be changed to the place that can be shifted or changed after the technical department has made the measures. The operator shall not carry out the displacement of the connecting wall rod without authorization.

It is necessary to carefully check whether the root binding of the dense mesh is loose and whether the net cord is broken. If loose, restore it in time. If broken, replace it with a new one in time.

Removing construction material, bricks, concrete blocks and other debris accumulated in the supporting parts supported by acrow props in time.

Putting a strict observation of the materials stacked by the construction personnel to make it not beyond the working bearing capacity.