Frame scaffolding

          Tubular scaffolding

       Construction efficiency

It is so easy to erect and dismantle the frame scaffolding and the erection speed is about 2-3 times that of the tubular scaffolding kind and the working strength is rather lower.

It is hard to erect and remove the tubular scaffolding as the tubes are heavily weighted. It has more than much couplers so the construction efficiency is rather low while the worker's strength is rather tight.

                   Safety

The maximum working load of each frame is +25KN, which is 2.5 times higher than that of the tubular scaffoldings. The frame scaffolding is reasonable and with higher safety ratio. The scaffolding with the fully planked board can fully secure the safety of the workers.

In the traditional tubular scaffolding system, the maximum exceeding working load shall be within 10KN with a rather lower safety ratio. The assembly height of the scaffolding shall be no more than 30 meters and the for the height over 30 meters, the frames shall be made up with two tubes.