Ringlock scaffolding and scaffolding used materials and the erection method is the same as ordinary steel pipe fastener scaffold, specific requirements are as follows:

1, poling: ≯ 2 m, horizontal stud spacing interval ≯ 1.8 m, the ground should be leveling to consolidate vertical pole into the ground 30 ~ 50 cm, would not be buried, stud should pad under sleepers and added rod sweeps the floor.
Step 2, bar: lateral horizontal tie from ≯ 1.8 m, the operational layer of ledger spacing ≯ 40 cm.

3, bracing: four corners should be set Angle brace, bracing, four edges of every four row among poling along the longitudinal set a bracing, brace and bracing shall be bottom-up continuous Settings.
4: laying, frame board frame within 4 m high, frame plate clearance ≯ 20 cm, to 4 m tall, frame plate must be spread

Feeding platform erection of safety technical disclosure
Set-up, 1, feeding platform independent platform from derrick clearance shall not exceed 10 cm, platform width to the principle of front-rear convenient length should be hanging bar or lateral.

2, build material: general use fir or steel build-up, when bearing weight is within 300 kg and height is not high also can use bamboo set-up should be used (selected), basic is the same as the scaffold erection method.
3, use structure: mainly as tic-tac-toe frame hanging basket front-rear channel used, generally do not pile up materials.
The main bar are: vertical rod, bar, horizontal bar, bracing, railings, etc.
4, set-up:

(1), vertical pole spacing within 1 ~ 1.5 m, step away from 1.5 m to 1.8 m depending on tall buildings, flat platform for every floor.
(2)every 1 ~ 1.5 m high, set a lateral horizontal tie, at the operational layer channel can be located in 1.8 m high.