Frame Scaffolding erection of various types of material can support frame templates, including beam mode, formwork, slab mold and mold base box, etc., and is used extensively for Beam template holder. In the mold slab formwork and scaffold, support height> 4.0m, known as "high-carriage", the early dismantling requirements and device are known as "early brace formwork system support frame."

Type fastener, bowls button and scaffoldings with steel materials can be used to construct the template cage, and each with distinct characteristics. Their situation can be configured to make the following classification:

(1) Classification by structure

1) strut support frame (pillar bearing framework);

2) sheet (bent) type support frame (composed of a row of horizontal coupling rod formed the backbone of the framework);

3) double frame scaffolding carriage (formed by two rows of pole supporting frame);

4) space frame support frame (or multi-row full house provided space frame).

(2) Press the lever system architecture division

1) geometric immutable truss frame support (rod slenderness ratio in line with the provisions of the truss, the vertical bar is not set oblique plane account for less than two directions sash frame architecture 1/2);

2) non-geometric immutable truss frame support (scaffolding in line with the provisions of the framework, but there are vertical plane tilt rods set lower than the total number of grid architecture 1/2).

(3) Classification by pillar

1) single-pole support frame;

2) Double pole supporting frame;

3) Lattice Column group support frame (column group formed by the lattice support frame);

4) mixing the pillars supporting frame (mixed single pole, double-pole, lattice column support bracket).

(4) divided by the level of framework conditions

1) or horizontal configuration layer does not have a small amount of shear or oblique rods Supporter support frame;