Steel scaffolding planks equipment manufacturer is found in the process of the erection of steel board, to keep fasteners, tools and materials to prevent fall injury. Throwing objects are strictly prohibited from the direction to designated persons care, prevent others go.

Enter the construction site wear a good helmet, likewise, fasten the work high above the fasten safety belt, water homework wear life jacket.


Construction at night, a big team must ensure that adequate illumination. Not allowed to move without voltage 220 v and above of lamps and lanterns and wire; When the wind more than 6, prohibit operation (open operation);Summer homework should be to do a good job of cooling purposes, winter operation should pay attention to prevent frostbite, frost, snow and frozen not clear or not safe anti-slip measures, construction is forbidden.


Steel board manufacturer is 2 m or more homework must be correct use double seat belts, and always maintain at least a safety latch on the pipe.

Wire rope, safety belt to high up with low, can't use low hanging high, can't switch on the artifacts have sharp edges, can't hang on the dangling end, to prevent falling.


Must not drinking before work, must not continuous fatigue homework; To enter the construction site, must wear labor protection articles.


Wear soft bottom rubber shoes when working, prevent slippery; On a piece of wooden board at the same time operating personnel shall not exceed 3 people, shall not chase scenes in the homework.


 
Steel scaffolding planks bar pull pipe butt joint is not allowed to use docking fastener connection, two or more fasteners must buckle, and allowance.

Steel tip lifting steel scaffolding planks manufacturer, bar, only apply mutatis mutandis to bind lifting rope in pairs, not application length not neat or single wire rope lifting.