Ringlock scaffolding is developed by China refer to foreign experience a kind of multi-functional scaffolding, its member nodes connected by ringlock, as the ringlock is fixed on the steel pipe, all axial component connection, good mechanics performance, reliable connection, scaffolding of integral sex is good, there is no buckle loss problem.

When the ringlock scaffolding assembly aim the last ringlock the gap after the limit pin, rail joint is inserted inside the bowl, pressure and rotating bowl, using the limit pin is fixed on the bowl. Ringlock joint can be connected at the same time four pillars and vertical each other or deflection Angle.

Choose ringlock scaffold, in order to give priority to support 600 specifications, in combination with other 300 and other structures supporting system as a whole. Within the scope of the local stress is larger, concentrate using partial encryption, to ensure the uniform stress. Scaffold with adjustable at the bottom of the base, adjusting base flatness error, ensure the accuracy of the frame body installation. At the local bar and rod between diagonal and horizontal tie, strengthen the stability of the frame body.

The top of the scaffold is equipped with adjustable jacking, maximum adjustable height is 300 mm.        

  
Ringlock scaffold made by steel tube pole, cross bar, ringlock joint, etc. Its basic construction and erection requirements and fastener type steel pipe scaffold is similar, the difference lies mainly in ringlock joint.

Ringlock joint is the key component of the scaffolding system, it is made up of joint on button bowl, the bowl, bar and ringlock on the limit pin, etc. Buckle bowl, the bowl on the limit pin on 60 cm spacing on steel stud, which under the bowl and limit pin directly on the stud welding.