Live Chat
ADTO News
-
Tie members in ring lock scaffolding
Tie members are indispensible elements in ring lock scaffolding system. Below come with many requirements on how to erect tie members to make sure the stability and firmness of the whole scaffolding system.
2015-05-06 -
What advantages the ringlock system scaffolds have?
Ringlock system scaffolds, as new kinds of scaffold system used in construction projects, have many advantages other scaffold products do not have.
2015-05-05 -
Construction tips of ring lock system
When erecting the ring lock system scaffolding, we shall put into practice these following steps to make sure the safety of the whole scaffolding system.
2015-05-05 -
Quality problems of ringlock system scaffold
Uneven thickness of wall body and its concave convex surface: the formwork shall be designed with enough strength and rigidity and the size of, space between keels, space between wall-piercing bolts and the propping braces of the wall body shall be implemented with rigor standards.
2015-05-04 -
Precautions when installing ringlock scaffold system
For the beam formworks and plate formworks in the ringlock scaffold system: Uneven surface of the beam and plate; out-of-straight lateral sides of the beam formwork. The beam, keel of plate formwork and intersect sizes and space between the intersects shall be determined after a discreet calculation.
2015-05-04 -
A brief peering at China swivel coupler
Couplers can be classified into several groups including right angular couplers, swivel couplers, joint pin couplers and base boards. The mechanical capacity has been clearly regulated in GB15831-1995 “tubular scaffolding system with couplers”, which is made and determined according to the bearing load of scaffoldings.
2015-04-29 -
Glance of Chinese tube and coupler scaffolding
Since 1960s, the Architectural Mechanical Department of Chinese Architecture Research Academy has carried out special study and research on calculating and designing of the tube and coupler scaffolding and its erecting, application and management, coupler material, as well as the capacity requirements and its inspection standards.
2015-04-29 -
Swivel Coupler Scaffold Fittings
We manufacture a wide extent of various scaffolding couplers that are in huge demand at both national and international market place.
2015-04-28 -
Right Angle Tube Clamps
Today, there is a trend of using the most cost effective and easy way to erect a scaffold in construction industry; therefore, we have manufactured a premium range of Right Angle Tube Clamps that are highly recognized for its high level of precision engineering features.
2015-04-28 -
Preparation on the site before dismantle clamp scaffolding
As a scaffold is dismantled, the components should immediately be removed from the structure and set aside for later inspection. There should also be enough prepartion before the real start of the dismantling process.
2015-04-27 -
Guidelines on safely dismantling scaffolding with clamp.
Properly dismantling construction tools with scaffolding clamp is as important as properly erecting it. Safety is everyone’s responsibility. Below come the guidelines on how to dismantle for the purpose of protecting staff’s safety.
2015-04-27 -
Sequel II ADTO excellence as construction supplier
Reporters of The International Business Daily from Business Department of China delivered a live interview of Mr. Tao Yangbo, director of ADTO Group. What’s more, the Telecom of Canton Fair and Financial Media also make relevant reports on the splendid view of ADTO in this Fair.
2015-04-24 -
Analysis on steel scaffolding clamps
The small flat tubes in scaffolding clamps system shall extrude about 10cm over the whole structure to avoid it from slipping out from the clamps at the end. In order to assure its role in the scaffolding system of connecting and fixing, the quality of scaffolding clamp its own and the fastening degree it have shall be discreetly inspected.
2015-04-24 -
Analysis on load bearing of steel scaffold clamp
Steel scaffold clamp is made up of load bearing tubes to form a single spanning frame structure featured of single construction and clear cut stress bearing. Among them big and small flat tubes and standing tubes make the load bearing frame.
2015-04-23 -
Sequel of ADTO excellence as a construction supplier
A client in Canton Fair ADTO stalls was deeply impressed and assured by ADTO’s comprehensive strength, his delicate exhibitions, proved qualified products and professional teams.
2015-04-23