Live Chat
ADTO News
-
Ringlock Scaffolding Industries Developing Along With the Trend
Because the building is in the plane of the fan, the curve radius is small, so the need for curve of scaffolding. Through calculation, the outer arc scaffold with three internode as a group, inner arc scaffolding is a set with 4-5 internode, and consists of a number line. Poling of the longitudinal spacing between 1.2 1.5 meters, the horizontal spacing of 1.2 meters, the spacing of the medial
2016-10-09 -
Scaffolding Coupler Right Way to Fix It Into Scaffolding System
Scaffolding coupler heat treatment process was strictly carry out the stages of temperature and time. Machining process, in strict accordance with Scaffolding couplers and strict to test plastic Scaffolding couplers and steel bonding surface, in order to make sure the Scaffolding couplers sliding resistance, tensile performance requirements. Scaffolding couplers (except base) must pass a 70 n. m torque testing, inspection, not allowed to damage.
2016-10-08 -
Pay Attention to Such Problems When Building Scaffolding System
Scaffolding security problems when use widely attention, how to prevent the scaffold safety, what issues in the process of scaffolding remove need to pay attention to? After the scaffolding, should be qualified by the security department and hang set & other; set up qualified & throughout; rear can put into use. don't dismantle the basic structure of bar and even the wall, when the need because of the job must be pulled down some bar and even the wall
2016-10-08 -
What If You Need Check How to Build the Scaffolding Tubes In A Right Way
Stud set must be equidistant to straight, the longitudinal spacing shall not be more than 1.8 m. Poling horizontal spacing of 1.0 m, poling from metope to 40 cm. Putlog vertical spacing interval) (that is, the scaffold is 1.8 m, the underlying interval shall not be greater than 2 m, small bar pick out the inside and the length of the stud shall not be less than 30 cm and 15 cm respectively. Scaffold outside every 9 m must establish a bracing, and the Angle of the ground should be controlled in 45 ° to 60 ° between top-down set in a row.
2016-10-07 -
How to Build the Scaffolding Tubes into the Whole Scaffolding System
1. The erection of scaffolding must be added a base or foundation, and the foundation of treatment. This project poling brace on the foundation slab directly or old soil, foundation pit bottom add tie bearing. Old soil surface laid foundation pit bottom plate must be smooth and shall not be suspended, placed the base should be pull and pull rod, spacing dimension by the regulation to be fixed after placement.
2016-10-07 -
Suggestions From Scaffolding Suppliers About How to Build the Scaffolding
Cuplock scaffolding dismantling points, the frame body dismantling shall be fully inspection before scaffolding connection, supporting system, such as whether conform to the requirements of the structure, according to the technology management program approval to implement demolition job. Scaffolding demolished before, on-site engineering and technical personnel for on-the-job operators targeted safety technical disclosure. Dismantled scaffolds shall be designated safety, set up warning signs, send modes. Demolition workers, a place, must hold
2016-09-29 -
Info About The Ringlock Scaffolding Couplers and Accessories
Ringlock scaffolding accessories loading and unloading speed is quick. Than the average fastener scaffold of handling several times faster, Ringlock scaffold fittings splice ability is better than that of the other scaffolding, because it is completely avoid the trouble in bolt in the process of use, one of the workers operating only need a simple little hammer can easily get a task, then it was
2016-09-29 -
How Much Material Will Be Needed to Build One Meter Scaffolding
The scaffolding after to buy or lease, are often scattered, need according to the needs of their own, specific to build. The scaffold erection of square meters how much material? This is a lot of people are asking a question, and the materials they need to the erection of scaffolding, including rail, and poling, there are some other pieces of small objects, etc., be sure to calculate good,
2016-09-28 -
The Right Ways to Diversify Different Kinds of Scaffolding
1, whether mobile: divided into mobile and fixed two; 2, material: wood, steel and ladder; 3, tower form and the using purpose: (1) - used to support the template form scaffolding, scaffold materials, authors of shelf (2) single scaffold - referred to as "single frame, or only a row of vertical rod, one end of the transverse horizontal bar on a scaffold on the wall (3) double row scaffolding - referred to as "double bent, by inside and outside the two rows of
2016-09-28 -
The Most Inclusive Coupler Type Steel Pipe Scaffold Designs
Should not only meet the requirements, should not exceed allowable bar bear ability, and not more than design allows load (270 kg / ㎡), scaffolding overall structure block unloading measures should be taken. The foundation Scaffolding foundation and foundation construction, must according to the height of the scaffold erection, erection of site soil conditions for processing. Scaffolding base level should be higher than the natural ground level ground 50 mm scaffolding
2016-09-27 -
How Will the China Formwork And Scaffolding Develop in Next Years
China Formwork, the development direction of scaffolding set according to China industry would down director Mr Fukui is introduced, at present the development direction of the China Formwork, scaffold engineering is as follows: 1, the safety of the product. Scaffolding and scaffolding products, especially in the design is not only convenient operation requirements, more safe and reliable, the scaffolding, the safety railing
2016-09-27 -
Regulations on How to Set Frame Scaffolding Bracing in A Right Way
Frame scaffold bracing is the scaffold plays a longitudinal stability, strengthen the longitudinal rigidity of important link. To ensure that the scaffold structure deformation, highly under 24 meters single and double row of scaffold, must set a bracing at opposite ends of the outer facade, and continuous Settings should be from bottom to top, middle of the clear distance between bracing should not be greater than 15 m.24 meters above the double row of scaffold should be
2016-09-26 -
What Are the Commonplace Problems of Scaffolding Design and Construction
design (1) to heavy scaffold should have a clear understanding, generally if the thickness of the floor more than 300 mm, should consider the design according to the heavy scaffolding, scaffolding load more than 15 kn/was, the design should organize expert argumentation. To separate the parts of the steel tube length changes on bearing, support for template should be considered: the top level of a rod of the centerline of the length of the template support should not be too long,
2016-09-25 -
The First Show of Formwork Scaffolding Will Be Held in Beijing
With China's construction industry continues to develop, for building the formwork scaffold industry provides opportunities for development. Of architectural aluminum formworks in the design, production and construction technology, with its energy conservation environmental protection concepts, standards, high efficiency of construction management, construction environment safe and clean, and the advantages of the high quality mature construction technology system, has become China's formwork of products in the industry.
2016-09-25 -
What is the Price of 48mm Steel Scaffolding tubes and Pipes
Nowadays, a lot of the scaffold were abandoned before is not very sturdy material, and choose to use steel tube as the primary material. And from the perspective of the types of steel pipe, here, the classification and very much, such as 48 mm steel pipe can be made into the scaffold. So the scaffold is the price?48 mm steel scaffolding tube how much is the price? For this problem, there is not the answer to a particular standard, because there are too many factors.
2016-09-22