Mobile scaffold use on construction sites in the exterior and interior or the height is higher can't construction directly. Mainly for construction personnel working up and down or peripheral safety maintenance and high altitude installation components etc, so there are several kinds of calculation methods on calculation of quantities, the calculation of the quantity is not the same.

For example
(1) outside scaffolding, scaffold in the metope of vertical projection area in square meters (m2), Windows and doors hole and the hole area are not deduct, every building height (unless quota indicate) in 1.5 m above all sorts of brick masonry are calculated to scaffolding.

(2) vertical projection area of wall of a scaffold in the length of the wall by the ground outside to the center line of the wall top surface height is calculated. Interior walls scaffolding of vertical projection area to interior wall net length by interior wall height calculation, gable is 1/2 height shall prevail.

(3) building exterior wall along the high, the interior wall height and the height of the wall within 3.6 m, according to the calculation in the scaffold. Building exterior wall along the high, interior wall height and the height of the wall above 3.6 m of masonry, calculated on external scaffold. Gable part from the ground outside (interior wall with indoor ground or floor surface) to the height of the gable 1/2 place more than 3.6 m, its entire gables calculated on the scaffold; Wall height & have spent From the ground to the cloud wall salient 1/2 height more than 3.6 m, the entire cloud wall calculated on the scaffold.

In the range of different calculation quantity is not the same, frame scaffolding calculation method in the project quantity, the more complex and content are many, therefore can view to ADTO group's official website.