It should pay attention to the erection work according to the following requirements for self protection and protect the good operation field personnel safety:

(1) in the scaffolding frame work of the workers should wear non-slip shoes and wear a seat belt. To facilitate the operation and safety, should lay at the foot of the necessary number of scaffolding, and should lay smoothly, and can not have the probe plate. When not laid down pedal, used to locate or grasping, put (clip) a bar shall be the stability of the frame part, beginning with the horizontal distance of frame nodes should not more than 0.8 M, vertical distance should be not more than 1.5 M, is located above the stud connectors free stud (not yet) and horizontal bar connection shall not be used as a control rod.

(2) the shelf operation personnel shall make good division of labor and cooperation, transfer bar should grasp the center of gravity, smooth transmission. Don't be too hard, lest cause personal or loss of cross bar. For each complete a process, to ask each other and can be confirmed after the procedure. 

(3) workers should wear tool bag, tools after use in the bag, not on the shelf, so as not to fall from. 
(4) building materials increases with the increasing in it, so as to avoid putting not fall at that time.

(5) before each call it a day, all stores all materials must be set-up, not on the shelf, and be sure to form stable structure, can't form a stable structure of a part of the temporary supports a measures should be taken to reinforce. 
(6) in the erection work, cooperate with researchers should avoid may fall on the ground of five areas.