1, erection site of scaffolding should be flat, and there shall be provision of drainage measures (drainage ditch). Scaffolding poles are at the necessary solid floor. Stand at the bottom of the land surface of the pole should be reinforced, specific methods are: prime soil compaction, shop 100 kind of slag, pole underlying channel 12 or 50mm thick planks.

2, before the erection of the first discharge line for construction, erection of scaffolding pole to determine the orientation.

3, the peripheral portion of the scaffolding should be a corner to start the erection of two extended cross ring, a shaped scaffold should start at one end and the other end extending to the erection.

4, the pole should be erected sequentially positioning the pole with the vertical and horizontal sweep shot convergence, then the first step in the installation of vertical and horizontal flat bar shall be fixed after proofreading straight pole, and demand continued upward Click erection.

5, before setting the first row of wall pieces, a shaped scaffold shall be provided the necessary number of bracing to ensure the safety and shelf stable staff framework. Scaffolding tube surrounding side ≥20m, and should be properly disposed bracing.

6, scissors, all bars and wall pieces should take liter with a shelf inclined pole, etc. along with timely setting.

7, between the scaffolding and the construction was necessary to set dead lift knot, Rachel horizontal distance 5.4m, straight from the floor in accordance with the fundamental story, and not more than 4.0m. Each node dead lift position in columns, beams side reserved buried iron, dead lift knot with Ф48 short scaffolding tube, one end embedded iron welding, one end of the scaffold fastener convergence.