A,floor ringlock scaffolding for ground control points: 1, appearance: vertical rod and bar for yellow, protective railings and bracing for the red and white alternate with, each length is 500 mm.

(1)ringlock scaffolding, groundwork and foundation should be according to the load, the erection height, site soil condition load calculation, determine the use wood fang, the planks or channel steel ringlock castor. The frame body is greater than 24 m is less than 50 meters must be set when the double stud reinforcement.

(2), based around the effective and smooth drainage system must be set.

(3), even the wall is a must adopt rigid component connection, horizontal pole must be respectively with internal and external connected with a cross stud buckle, and ends in adding antiskid fasteners a conform to the requirements of even the wall a total of five fasteners);With embedded pole spacing shall not be greater than 100 from the ground, the distance deviation from the master node should not be greater than 300 mm.

In adornment stage even the wall affect the construction need to be dismantled, must submit a written application by the construction master the technical director for approval, first dismantled after reinforcement, reinforcing the wall parts shall not be less than the number of strength and intends to dismantle the wall.

(4), even the wall of a horizontal pole appropriate level settings, but at the end of the inferior oblique connected to the vertical bar connection, the ban on inclined connection. The corner of the scaffold, open mouth at both ends of the scaffold, man cargo elevators must be set on both sides of the wall.

4, horizontal brace: body opening and the frame body height more than 24 m Angle, straight segment across every six should be bottom-up continuous settings.