Cuplock scaffolding joint by joint on button cuplock scaffolding, the cuplock scaffolding, bar and the cuplock scaffolding on the limit pin, etc. Stud welding on the limit pin buckle cuplock scaffolding and the cuplock scaffolding, cuplock scaffolding type steel pipe scaffold made by steel tube pole, cross bar, cuplock scaffolding joint, etc.

The basic construction and erection requirements are similar to the fastener type steel pipe scaffold. The cuplock scaffolding set into the stud. Rail welding and diagonal plug. Assembly, the rail and the inclined rod inserted into the cuplock scaffolding, compression and rotation on the cuplock scaffolding, using the limit pin is fixed on the cuplock scaffolding

Application layer 1 poling a length of 1.8 m and 3.0 m poling stagger arrangement, cuplock scaffolding type steel pipe scaffold pillar longitudinal distance according to the scaffolding load transverse distance of 1.2 m to 1.2 m, 1.5 m, 1.8 m, 2.4 m step distance of 1.8 m, 2.4 m build-up of poling extension should be staggered.3.0 m long, up to the top with a length of 1.8 m and 3.0 m two leveling. High 30 m below the scaffolding verticality deviation should be controlled within 1/200, more than 30 m high scaffolding should be controlled in 1/400 ~ 1/600 of the total high verticality deviation should be no greater than 100 mm

There are many kinds of scaffolding you said that one of them.

For the construction and erection of feeding, feed and construction of temporary structures.
One end of the lateral horizontal pole shelve the scaffold on the wall. Single row scaffolding (single) only a row of stud.
Double-row scaffold (double bent) stands by two rows of inside and outside the scaffold pole and horizontal pole, etc.