Using scaffolding should be set for the use of the operating personnel security escalator, gym or ramps; After the erection of should check acceptance, after inspection qualified to be used; On the scaffold at the same time, under the condition of multilayer, various assignments between layers should be set reliable protective casing, to prevent the upper falling objects and the lower operating personnel; To repair and reinforcement of scaffolding. Special construction scheme, the scaffold should include the scheme and measures of scaffolding removal, demolition should be strictly observed.

Ringlock scaffolding type as a new type of scaffolding, scaffolding set-up is fast, safe, convenient, save material characteristics such as widely used in large-scale project construction, ring lock scaffold system should use the same elevation of beam bottom elevation range, for larger height and span of a single component bearing rack to pull bar and poling axial pressure calculating the critical force (), to ensure the stability of the frame body and safety.

A, Ringlock type scaffold erection sequence and steps

1, in accordance with the site and layout size, put the adjustable base, and the adjustable base nut to roughly the same level;

2, install the vertical pole erected on the adjustable base, and in the same way the installation adjacent to a vertical rod;

3, will correspond to the span length of rail hooking in installed good promulgation and between disk button.

4, installation adjacent stud, at the same time, to bar hooking;

5, continue to install poling, bar hooking form four after poling a unit body;

6, use level, rotate the adjustable base, to build a good base for level adjustment;

7, will base level after the adjustment, the pursuit of root with corresponding diagonal;