When erecting a scaffolding system, we need to get a solid and even base for the preparations. Below we will make a brief introduction on the common base used in the erection of Ringlock Scaffolding. Hope it will help you.

ADJUSTABLE SCREW JACK

The Screw jack/Base jack is used as a starting base for a Ringlock Scaffolding. ADTO Base Jack can be divided into Solid Base Jack and Hollow Base Jack. It is adjustable in height to allow for compensation on uneven surfaces so that a level Scaffold System is always attainable.

SWIVEL JACK

The Swivel jack is used as a starting base for Ringlock Scaffold System. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level Scaffold of Ringlock is always attainable.

CASTOR

The Castor is designed to provide mobility to a medium to large size scaffold tower allowing the tower to roll across a flat surface. The Adaptor/ Solid Screw Jack can be fixed to the top of the Castor using Bolt and Nut fixtures. This allows for the Ringlock Scaffolding Standard to attach directly to the Adaptor/Castor combination.

ADAPTER FOR CASTOR

The Adapter for Castor is used as a base connection point to a Castor and provides a base spigot to use with Standards or Base Collars to begin scaffold construction.

STARTER/BASE COLLAR

The Base Collar is the beginning part of the Ringlock Scaffolding system. It sits upon a fixed or Adjustable Base Jack.